Elbow with Adjustable Rotation Angle
|Product number||Handrail Size||Recommended Location Usage||Manufacturing Material||Baluster Post Size|
|HR18420838170||1 1/2 in*||Interior||Stainless Steel: 304||1 1/2 in*|
|HR18620838170||1 1/2 in*||Interior / Exterior||Stainless Steel: 316||1 1/2 in*|
|HR18420842170||1 21/32 in*||Interior||Stainless Steel: 304||1 21/32 in*|
|HR18620842170||1 21/32 in*||Interior / Exterior||Stainless Steel: 316||1 21/32 in*|
|HR18420850170||2 in*||Interior||Stainless Steel: 304||2 in*|
|HR18620850170||2 in*||Interior / Exterior||Stainless Steel: 316||2 in*|
Articulated elbow designed to personalize tubing handrails.
Links two round tubes to create a corner handrail.
The elbow is held with an inside mounting screw.
Simply unscrew it to separate the two sections and create the desired angle before screwing again.
Requires the following products
Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.
316 Stainless Steel Handrail TubingProduct number HR186500224170Length of 2.4 linear meter
Drawings and technical documents contain examples of hardware from different manufacturers. The customer may not in any case make a claim following the use of these documents. The Company disclaims any responsibility for the structural details related to a construction or project.
Installation must always be done by qualified personnel. Make sure that the product is properly installed using suitable fixtures on the support material. Never exceed the maximum load or size recommended by the manufacturer.