Line art and Instructions
Round Double-Point Support System for Glass Railing
This system is used in several applications such as the perimeter of a terrace or the railing of a balcony.
Using the same principle as the fixing spacers for glass, this system allows the installation of glass panels on the facade.
The brackets fixed to the wall plate allow the glass to be moved away from the surface.
Excellent corrosion resistance for use in all outdoor installation projects.
Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.
Can be attached to different substrates using the right anchors.
Suitable for several thicknesses of glass.
Drilling the glass required for use
Install the wall plate directly to the substrate, then install the supports, the glass and finalize with the caps.
The use of power tools during installation may damage the hardware.
The glass must be shaped according to the section plane provided in the box.
Always set the product in a suitable material.
Never exceed the load or maximum size recommended by the manufacturer.
Never use a spray lubricant on this product.
Maintenance: clean with a soft cloth and non-abrasive soap or ammonia.
This illustration is provided for visual reference only. Actual product may differ from the illustration.
Order hardware before starting the job. The manufacturer reserves the right to change product and information without notice.
Always use the instructions inside the package.
Drawings and technical documents contain examples of hardware from different manufacturers.
The customer may in no case make a claim following the use of these documents.
The Company disclaims any responsibility for the structural details related to a construction or project.
Installation must be done by qualified personnel.