Square Double-Point Mounting Bracket for Glass Railing

To buy, choose from the options below.
Color/Finish: Polished Stainless Steel Stainless Steel Select Options
Product number Color/Finish
706SP0222205171 Polished Stainless Steel
706SP0222205170 Stainless Steel

Description

Front mounting with two 50 mm x 50 mm cubic attachment points

This system is used in several applications such as the perimeter of a terrace or the railing of a balcony.

Using the same principle as the fixing spacers for glass, this system allows the installation of glass panels on the facade.
The brackets fixed to the wall plate allow the glass to be moved away from the surface.

Excellent corrosion resistance for use in all exterior projects.

TECHNICAL SPECIFICATIONS

Safety Glass Thickness
15/32 to 19/32 in*
Type of Mounting
Face Mount
Mounting Side
Reversible
Height
8 in*
Recommended Location Usage
Interior, Exterior
Manufacturing Material
Stainless Steel: Duplex 2205
Load Capacity for Four Brackets
Max. 198 lb*
Load Capacity for Two Brackets
Max. 99.2 lb*
Panel Height
Max. 47 1/4 in*
Panel Width
Max. 78 3/4 in*
Width
3 15/16 in*
Milling C/C
3 15/16 in*
Milling Diameter
25/32 in*
Disclaimer

Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.

RELATED DOCUMENTS

ADVANTAGES AND BENEFITS

Allows the glass panel to be installed parallel to the front of the balcony.
Can be attached to different substrates.
Suitable for several thicknesses of glass.

APPLICATION

Front mounting with two fixing points.
Drilling the glass required for use.
Install the wall plate directly to the substrate, then install the supports, the glass and finalize with the caps.

INCLUDED PRODUCT(S)

1 support system and mounting hardware

IMPORTANT INFORMATION

For safety purposes, use tempered glass.
The use of power tools during installation may damage the hardware.
The glass must be shaped according to the section plane provided in the box.
Always set the product in a suitable material.
Never exceed the load or maximum size recommended by the manufacturer.
Never use a spray lubricant on this product.
Maintenance: clean with a soft cloth and non-abrasive soap or ammonia.
This illustration is provided for visual reference only. Actual product may differ from the illustration.
Order hardware before starting the job. The manufacturer reserves the right to change product and information without notice.
Always use the instructions inside the package.

Drawings and technical documents contain examples of hardware from different manufacturers.
The customer may in no case make a claim following the use of these documents.
The Company disclaims any responsibility for the structural details related to a construction or project.
Installation must be done by qualified personnel.

DISCLAIMER

The information and technical recommendations presented in written or verbal form, or based on tests, are provided according to the best available knowledge. These recommendations are non-binding and do not relieve you of the responsibility of verifying and correcting data and products yourself to ensure compliance with the procedures and practices you are seeking. The application, use and processing of our products, and the realization of your projects based on our technical advice are beyond our control and are exclusively your responsibility. The sale of our products is subject to our general conditions of sale in force. Please note that Richelieu will refuse any return or claim for an unpackaged product.
Square Double-Point Mounting Bracket for Glass Railing

To buy, choose from the options.