Euro Series Industrial Rubber Casters

To add to cart, choose from the options below.

Superior rolling quality

These Euro series industrial rubber casters are suitable for surfaces that have water, detergent, petroleum, or by-products. Available with fixed, swivel, or double locking plate.
Load Capacity Per Caster: Max. 110 lb* Max. 154 lb* Max. 220 lb* Max. 309 lb* Wheel Diameter: 3 5/32 in* 3 15/16 in* 4 29/32 in* 6 5/16 in* Total Height: 4 1/8 in* 5 1/32 in* 6 3/32 in* 7 11/16 in* Tread Width: 31/32 in* 1 3/16 in* 1 15/32 in* 1 9/16 in* Fastening Type: Fixed Fixed Swivel with Double-Lock Brake Swivel with Double-Lock Brake Swivel Without Brake Swivel Without Brake Axle Diameter: 15/32 in* 19/32 in* 25/32 in* Axle Length: 1 9/16 in* 1 15/16 in* 2 5/16 in* Mounting Hole Diameter: 11/32 in* 15/32 in* Mounting Plate Dimensions: 3 5/32 in x 4 1/32 in (80 mm x 102 mm) 4 11/32 in x 5 5/16 in (110 mm x 135 mm) Select Options
Product # Load Capacity Per Caster Wheel Diameter Total Height Tread Width Fastening Type Axle Diameter
F24796 Max. 110 lb* 3 5/32 in* 4 1/8 in* 31/32 in* Fixed 15/32 in*
F24801 Max. 110 lb* 3 5/32 in* 4 1/8 in* 31/32 in* Swivel with Double-Lock Brake 15/32 in*
F24790 Max. 110 lb* 3 5/32 in* 4 1/8 in* 31/32 in* Swivel Without Brake 15/32 in*
F24797 Max. 154 lb* 3 15/16 in* 5 1/32 in* 1 3/16 in* Fixed 15/32 in*
F24802 Max. 154 lb* 3 15/16 in* 5 1/32 in* 1 3/16 in* Swivel with Double-Lock Brake 15/32 in*
F24791 Max. 154 lb* 3 15/16 in* 5 1/32 in* 1 3/16 in* Swivel Without Brake 15/32 in*
F24798 Max. 220 lb* 4 29/32 in* 6 3/32 in* 1 15/32 in* Fixed 19/32 in*
F24803 Max. 220 lb* 4 29/32 in* 6 3/32 in* 1 15/32 in* Swivel with Double-Lock Brake 19/32 in*
F24792 Max. 220 lb* 4 29/32 in* 6 3/32 in* 1 15/32 in* Swivel Without Brake 19/32 in*
F24788 Max. 309 lb* 6 5/16 in* 7 11/16 in* 1 9/16 in* Swivel Without Brake 25/32 in*

ADVANTAGES AND BENEFITS

- Metal thread guard
- Double-lock braking system for both the wheel and the swivel (F24801, F24802, and F24803)
- Grease seal holds in lubricant
- Corrosion-resistant zinc finish
- Fully seated ball bearing eliminates the need for axle lubrication, thus reducing maintenance costs
- Two independent rows of hardened, polished precision ball bearings roll freely in large-diameter lubricated raceways

TECHNICAL SPECIFICATIONS

Mounting Type
Plate
Material
Euro Series Rubber
Recommended Surfaces
Concrete, Steel, Wood/Planking, Asphalt
Finish
Black
Conditions
Water, Detergent, Petroleum Products
Disclaimer

Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.

IMPORTANT INFORMATION

For all additional measurements, please see the technical documents.

RELATED DOCUMENTS

DISCLAIMER

Technical data subject to change without prior notice.