With 5/8 in (16 mm) panel page 1
Liberta 25 Profile with Shelf Holder
To add to cart, choose from the options below.
This profile is available in three finishes (matte black, black anthracite, and satin aluminum) and is specially engineered to sit a panel of 5/8 in (16 mm) without effort.
Once installed, the panel will be perfectly aligned with the profile.
Possibility of mounting 3/4 in (19 mm) shelves. Simply groove the underside of your panel: min. 7/32 in (5 mm) in depth and min. 5/32 in (4 mm) in height.
In addition, glass shelves of 1/4 in (6 mm) can also be specified. A slight offset will occur between the top of the profile and the glass which will secure the items on the glass.
Profile can easily be cut to size. For a perfect cut, use a miter saw at recommended cutting speed of 2000 rpm.
Once installed, the panel will be perfectly aligned with the profile.
Possibility of mounting 3/4 in (19 mm) shelves. Simply groove the underside of your panel: min. 7/32 in (5 mm) in depth and min. 5/32 in (4 mm) in height.
In addition, glass shelves of 1/4 in (6 mm) can also be specified. A slight offset will occur between the top of the profile and the glass which will secure the items on the glass.
Profile can easily be cut to size. For a perfect cut, use a miter saw at recommended cutting speed of 2000 rpm.
TECHNICAL SPECIFICATIONS
Type
Profiles
Height - Overall Dimensions
31/32 in*
Width - Overall Dimensions
31/32 in*
Material
Aluminum
Length - Overall Dimensions
9 ft 10 in*
Disclaimer
Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.
