Assembly instructions
Swivel Plate
Product # UC3312
Made of corrosion-resistant galvanized steel.
Swivel bearing design has a deeper race groove, encapsulating the balls more effectively and allowing them to move more smoothly.
Swivel bearing design has a deeper race groove, encapsulating the balls more effectively and allowing them to move more smoothly.
| Product # | Features | Depth | Load Capacity | Width |
|---|---|---|---|---|
| UC3312 | With UPC Code | 3 in | 200 lb | 3 in |
| 3312 | Without UPC Code | 3 in | 200 lb | 3 in |
| 4412 | Without UPC Code | 4 in | 300 lb | 4 in |
| 6612 | Without UPC Code | 6 in | 500 lb | 6 in |
| UC4412 | With UPC Code | 4 in | 300 lb | 4 in |
| UC6612 | With UPC Code | 6 in | 500 lb | 6 in |
ADVANTAGES AND BENEFITS
Our swivel bearing design has a deeper race groove, encapsulating the balls more effectively and allowing them to move more smoothly.
TECHNICAL SPECIFICATIONS
Product #
UC3312
Swivel
360 Degrees
Material
Steel
Finish
Zinc
Height
5/16 in
IMPORTANT INFORMATION
Assembly instructions:
3" - 4" - 6" - 12" Sizes (Without Speed Nuts)
A. Use the smallest holes as a template to mark the turntable for blind fastening. Remove the bearing and then drill holes for self-tapping screws.
- For 3" - 4" - 6" sizes: drill 5/32" holes for #6 self-tapping screws.
- For 12" size: drill 3/16" holes for #8 screws.
- Avoid contamination from sawdust, paint or any other foreign material.
B. Lubricate the bearing balls with a small amount of heavy oil or grease. Mount the bearing on the selected center of the base using #6 wood screws.
C. Assemble turning section to the bearing. Make sure to select fasteners of the proper length to avoid interference with the opposite section.
3" - 4" - 6" - 12" Sizes (Without Speed Nuts)
A. Use the smallest holes as a template to mark the turntable for blind fastening. Remove the bearing and then drill holes for self-tapping screws.
- For 3" - 4" - 6" sizes: drill 5/32" holes for #6 self-tapping screws.
- For 12" size: drill 3/16" holes for #8 screws.
- Avoid contamination from sawdust, paint or any other foreign material.
B. Lubricate the bearing balls with a small amount of heavy oil or grease. Mount the bearing on the selected center of the base using #6 wood screws.
C. Assemble turning section to the bearing. Make sure to select fasteners of the proper length to avoid interference with the opposite section.
