Swivel Plate

To buy, choose from the options below.
Features: Without UPC Code With UPC Code Depth: 3 in 4 in 6 in Load Capacity: 200 lb 300 lb 500 lb Width: 3 in 4 in 6 in Packaging format: Per unit Bag Select Options
Product number Features Depth Load Capacity Width Packaging format
3312 Without UPC Code 3 in 200 lb 3 in Per unit
4412 Without UPC Code 4 in 300 lb 4 in Per unit
6612 Without UPC Code 6 in 500 lb 6 in Per unit
UC3312 With UPC Code 3 in 200 lb 3 in Per unit
UC4412 With UPC Code 4 in 300 lb 4 in Per unit
UC6612 With UPC Code 6 in 500 lb 6 in Per unit
BP6612 With UPC Code 6 in 500 lb 6 in Bag

Description

Made of corrosion-resistant galvanized steel.

TECHNICAL SPECIFICATIONS

Swivel
360 Degrees
Material
Steel
Finish
Zinc
Height
5/16 in

SUGGESTED PRODUCTS

RELATED DOCUMENTS

ADVANTAGES AND BENEFITS

Our swivel bearing design has a deeper race groove, encapsulating the balls more effectively and allowing them to move more smoothly.

IMPORTANT INFORMATION

Assembly instructions:

3" - 4" - 6" - 12" Sizes (Without Speed Nuts)

A. Use the smallest holes as a template to mark the turntable for blind fastening. Remove the bearing and then drill holes for self-tapping screws.

- For 3" - 4" - 6" sizes: drill 5/32" holes for #6 self-tapping screws.
- For 12" size: drill 3/16" holes for #8 screws.
- Avoid contamination from sawdust, paint or any other foreign material.

B. Lubricate the bearing balls with a small amount of heavy oil or grease. Mount the bearing on the selected center of the base using #6 wood screws.

C. Assemble turning section to the bearing. Make sure to select fasteners of the proper length to avoid interference with the opposite section.
Swivel Plate

To buy, choose from the options.