Section 2
Heavy-Duty Flush Mount Bracket
Product # EH1209FMP
These brackets use an L-shaped vertical leg flange that screws to the right side of the bare stud. After installation of the brackets, drywall is installed around the bracket to hide the vertical support. Only the shelf bracket is visible.
Construction:
TIG (tungsten inert gas) welded along both 45° mitered sides and across the back. All sharp edges ground and deburred.
Hardware:
5/16" holes accept 1/4" screws.
Installation:
48" maximum spacing into studs or blocking or as specified by counter top supplier.
Construction:
TIG (tungsten inert gas) welded along both 45° mitered sides and across the back. All sharp edges ground and deburred.
Hardware:
5/16" holes accept 1/4" screws.
Installation:
48" maximum spacing into studs or blocking or as specified by counter top supplier.
TECHNICAL SPECIFICATIONS
Product #
EH1209FMP
Projection - Overall Dimensions
12 in
Height - Overall Dimensions
9 in
Material
6063-T6 Extruded Aluminum
Color/Finish
White Primer
Shelf Width
9 in
"T-Bar" Dimension
2" x 2"
