Line art
Riveo Square Pivot Hinge - Header Mount
Product # SH3SQ360H195
This 360° pivot hinge is available in Standard and Header Mounting configurations. Standard pivot hinges are reversible for top or bottom installation, allowing for the creation of full floor-to-ceiling doors as well as for pairing with other top mounted pivot hinges.
Pivot hinges can be inset from the wall to provide better clearance for towel racks and other accessories.
These hinges are value engineered, making them ideal for multi-unit and large scale projects.
Pivot hinges can be inset from the wall to provide better clearance for towel racks and other accessories.
These hinges are value engineered, making them ideal for multi-unit and large scale projects.
Product # | Finish |
---|---|
SH3SQ360H195 | Brushed Nickel |
SH3SQ360H900 | Matte Black |
ADVANTAGES AND BENEFITS
360° rotation
REQUIRED PRODUCTS
Requires the following products
TECHNICAL SPECIFICATIONS
Product #
SH3SQ360H195
Angle
360°
Application
Corner Shower, Door, Door and Panel
Collection
Riveo
Glass Thickness
5/16 to 13/32 in*
Brand
Riveo
Material
Solid Brass/Stainless Steel Pin & Spring
Max. Glass Width for 2 Hinges
Max. 31 in*
Mounting Method
Header Mount
Max. Glass Weight for 2 Hinges
Max. 99.2 lb*
Style
Square
Hinge Type
Standard
Usage
Regular
Disclaimer
Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.
APPLICATION
Designed to be used with several thicknesses of tempered glass.
Square type glass milling required for installation.
Square type glass milling required for installation.
IMPORTANT INFORMATION
For safety purposes, use tempered glass.
The glass must be shaped according to the section plane.
Always set the product in a suitable material.
Never exceed the load or maximum size recommended by the manufacturer.
Always order hardware before starting the job. The manufacturer reserves the right to change product and information without notice. Always follow the instruction manual provided in the packaging.
The drawings and technical instructions show mounting examples using hardware from different manufacturers. Richelieu expressly declines all responsibility for any design or construction, whether based on these documents or not. Installation must be done by qualified personnel.
The glass must be shaped according to the section plane.
Always set the product in a suitable material.
Never exceed the load or maximum size recommended by the manufacturer.
Always order hardware before starting the job. The manufacturer reserves the right to change product and information without notice. Always follow the instruction manual provided in the packaging.
The drawings and technical instructions show mounting examples using hardware from different manufacturers. Richelieu expressly declines all responsibility for any design or construction, whether based on these documents or not. Installation must be done by qualified personnel.
DISCLAIMER
The preceding information as well as any technical recommendation given in writing, verbally or based on tests are provided to the best of our knowledge. However, they are non-binding recommendations only and do not affect your responsibility to determine the correctness of given recommendations and suitability of the product for your particular purposes. The application, use or processing of our products as well as the production of products based on our technical recommendations are beyond our control and therefore fall exclusively in your area of responsibility. Sales of our products are subject to our most recent General Sales and Delivery Conditions. Please note that Richelieu will not accept any returns or claims for unpackaged products.