Mounted Transom Patch, T Installation

Product #: 701RPF049170

Description

Suitable for top pivot two-point installation

Mounted transom patch for installation on fixed glass panels, creating side-by-side double doors. Can be used with several kinds of adapters, according to the frameless glass door layout to be created.
Suitable for various thicknesses of glass.

TECHNICAL SPECIFICATIONS

Product number
701RPF049170
Finish
Brushed
Color
Stainless Steel
Glass Thickness
13/32 to 15/32 in*
Length
13 1/8 in*
Width
5 19/32 in*
Manufacturing Material
Stainless Steel: 304
Height
2 in*
Color Number
170
Color Group
Metal Group
Disclaimer

Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.

ADVANTAGES AND BENEFITS

Can create an all-glass design, as seen in offices or other glass structures in commercial zones. Its T-shape can hold in place three fixed glass panels and two glass doors for an opening and closing system.

APPLICATION

Installed on the glass to support one to two crosspieces from the lateral glass partition. By using the correct pivot, the doors can open one-way or two-ways.

IMPORTANT INFORMATION

For safety purposes, use tempered glass. The glass must be shaped according to the section plane provided in the box. Always set the product in a suitable material.

Never exceed the maximum load or size recommended by the manufacturer. Order hardware before starting the job.

This illustration is provided for visual reference only. Actual product may vary. The manufacturer reserves the right to change product and information without notice. Always follow the instructions inside the package.

Drawings and technical documents contain examples of hardware from different manufacturers. The customer may not in any case make a claim following the use of these documents. The Company disclaims any responsibility for the structural details related to a construction or project.

Installation must always be done by qualified personnel.

RELATED DOCUMENTS

DISCLAIMER

The preceding information, as well as any technical recommendation given in writing or verbally, whether based on tests or not, is provided to the best of our knowledge. Recommendations are non-binding and do not diminish your responsibility for determining the correctness of these recommendations and the suitability of the product for your particular purpose. The application, use or processing of our products, as well as the execution of projects based on our technical recommendations are beyond our control and therefore exclusively your responsibility. Sales of our products are subject to our most recent General Sales and Delivery Conditions. Please note that Richelieu will not accept any returns or claims for unpackaged products.
Mounted Transom Patch, T Installation

Product number: 701RPF049170