Line art and Instructions
Hydraulic Self-Closing Bottom Pivot Patch-Fitting Hinge
This hydraulic floor hinge includes a multi adjustable mounting plate and two adjustment valves for closing speed.
The open angle is 140° maximum
Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.
- Replacement Cover Plates for Commercial Patch Fittings
- Commercial Patch Fittings
- forward and backward
- left and right
- amplitude to adjust the alignment
The glass must be shaped according to the section plane provided in the box.
The use of power tools during installation may damage the hinges and decorative hardware. Never use a spray lubricant on this product. Maintenance: clean with a soft cloth and soap that is ammonia-free and nonabrasive.
This illustration is provided for visual reference only. Actual product may vary. Order hardware before starting the job. The manufacturer reserves the right to change product and information without notice. Always follow the instructions inside the package.
Drawings and technical documents contain examples of hardware from different manufacturers. The customer may not in any case make a claim following the use of these documents. The Company disclaims any responsibility for the structural details related to a construction or project.
Installation must always be done by qualified personnel. Make sure that the product is properly installed using suitable fixtures on the support material. Never exceed the maximum load or size recommended by the manufacturer.