Wall Mount 90° Spring and Hydraulic Self-Closing Glass Door Hinge Set

Product #: CDHH90SS
Pair

Description

Hold open at 90°

These hinges pivot 90° inward and outward, and stop at 0°, +90° and -90°.
The closing speed can be adjusted with the help of valves that are integrated into the pivot and hidden under the hinge.
Designed for interior glass doors leading to a bathroom area or as hardware for gates.
These hinges will allow you to create a door that closes automatically without having to use a mounting device on the floor or ceiling.
You can therefore install a glass door in an existing opening without having to spend money on expensive modifications to the floor or ceiling hardware.

TECHNICAL SPECIFICATIONS

Product number
CDHH90SS
Color
Stainless Steel
Manufacturing Material
Stainless Steel: 316
Glass Thickness
13/32 to 15/32 in*
Mounting method
Glass-to-Wall/90°
Height
4 11/32 in*
Length
2 7/8 in*
Width
2 5/32 in*
Finish
Brushed
Mounting side
Reversible
Recommended Location Usage
Interior, Exterior
Usage
Heavy-Duty
Recommended Door Height
Max. 86 5/8 in*
Max. Door Width for 2 Hinges
Max. 31 1/2 in*
Load Capacity
Max. 132 lb*
Weight Capacity for 2 Hinges
Max. 132 lb*
Color Number
170
Color Group
Metal Group
Disclaimer

Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.

ADVANTAGES AND BENEFITS

These hinges pivot 90 degrees inward and outward.
Adjustable closing speed.

APPLICATION

Designed for interior glass doors leading to a bathroom area or commercial zone.

IMPORTANT INFORMATION

The hydraulic hinge should always be installed underneath the spring hinge.
Installation requires a "mouse ear" glass cut.

For safety purposes, use tempered glass.
The glass must be shaped according to the section plane provided in the box.
The use of power tools during installation may damage the hinges and decorative hardware. Maintenance: clean with a soft cloth and soap that is ammonia-free and nonabrasive.

This illustration is provided for visual reference only. Actual product may vary. Order hardware before starting the job. The manufacturer reserves the right to change product and information without notice. Always follow the instructions inside the package.

Drawings and technical documents contain examples of hardware from different manufacturers. The customer may not in any case make a claim following the use of these documents. The Company disclaims any responsibility for the structural details related to a construction or project.

Installation must always be done by qualified personnel. Make sure that the product is properly installed using suitable fixtures on the support material. Never exceed the maximum load or size recommended by the manufacturer.

RELATED DOCUMENTS

DISCLAIMER

The preceding information as well as any technical recommendation given in writing, verbally or based on tests is provided to the best of our knowledge. However, recommendations are non-binding and do not diminish your responsibility for determining the correctness of these recommendations and the suitability of the product for your particular purpose. The application, use or processing of our products as well as the production of products based on our technical recommendations are beyond our control and therefore exclusively your responsibility. Sales of our products are subject to our most recent General Sales and Delivery Conditions. Please note that Richelieu will not accept any returns or claims for unpackaged products.
Wall Mount 90° Spring and Hydraulic Self-Closing Glass Door Hinge Set

Product number: CDHH90SS

Pair