Hydraulic Patch Door Kit
Maximum opening at 150°
This hydraulic patch door kit includes top patch, pivot, and bottom hinge.
Available models include hold-open at 90° or non-hold options.
Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.
- Easy to install and adjust
- Concrete fasteners included
Recommended for use in areas with moderate traffic.
Maximum door width: 39 3/8 in (1000 mm)
Do not use with laminated safety glass.
The glass must be shaped according to the section plane provided in the box.
The use of power tools during installation may damage the hinges and decorative hardware. Never use a spray lubricant on this product. Maintenance: clean with a soft cloth and soap that is ammonia-free and nonabrasive.
This illustration is provided for visual reference only. Actual product may vary. Order hardware before starting the job. The manufacturer reserves the right to change product and information without notice. Always follow the instructions inside the package.
Drawings and technical documents contain examples of hardware from different manufacturers. The customer may not in any case make a claim following the use of these documents. The Company disclaims any responsibility for the structural details related to a construction or project.
Installation must always be done by qualified personnel. Make sure that the product is properly installed using suitable fixtures on the support material. Never exceed the maximum load or size recommended by the manufacturer.
- Pivot bracket
- Hydraulic bottom patch fitting with cladding
- Fasteners for concrete