Wall Mount 90° Spring and Hydraulic Self-Closing Glass Door Hinge Set

Product # CDHH90SS

Hold open at 90°

These hinges pivot 90° inward and outward, and stop at 0°, +90° and -90°.
The closing speed can be adjusted with the help of valves that are integrated into the pivot and hidden under the hinge.
Designed for interior glass doors leading to a bathroom area or as hardware for gates.
These hinges will allow you to create a door that closes automatically without having to use a mounting device on the floor or ceiling.
You can therefore install a glass door in an existing opening without having to spend money on expensive modifications to the floor or ceiling hardware.


These hinges pivot 90 degrees inward and outward.
Adjustable closing speed.


Product #
Brushed Stainless Steel
Stainless Steel: 316
Glass Thickness
10 to 12 mm
Mounting Method
110 mm
73 mm
55 mm
Weight Capacity for 2 Hinges
Max. 60 kg
Recommended Location Usage
Interior, Exterior
Mounting Side
Recommended Door Height
Max. 2 200 mm
Load Capacity
Max. 60 kg
Max. Door Width for 2 Hinges
Max. 1 000 mm


Designed for interior glass doors leading to a bathroom area or commercial zone.


The hydraulic hinge should always be installed underneath the spring hinge.
Installation requires a "mouse ear" glass cut.

For safety purposes, use tempered glass.
The glass must be shaped according to the section plane provided in the box.
The use of power tools during installation may damage the hinges and decorative hardware. Maintenance: clean with a soft cloth and soap that is ammonia-free and nonabrasive.

This illustration is provided for visual reference only. Actual product may vary. Order hardware before starting the job. The manufacturer reserves the right to change product and information without notice. Always follow the instructions inside the package.

Drawings and technical documents contain examples of hardware from different manufacturers. The customer may not in any case make a claim following the use of these documents. The Company disclaims any responsibility for the structural details related to a construction or project.

Installation must always be done by qualified personnel. Make sure that the product is properly installed using suitable fixtures on the support material. Never exceed the maximum load or size recommended by the manufacturer.



The preceding information as well as any technical recommendation given in writing, verbally or based on tests is provided to the best of our knowledge.
However, recommendations are non-binding and do not diminish your responsibility for determining the correctness of these recommendations and the suitability of the product for your particular purpose.
The application, use or processing of our products as well as the production of products based on our technical recommendations are beyond our control and therefore exclusively your responsibility.
Sales of our products are subject to our most recent General Sales and Delivery Conditions. Please note that Richelieu will not accept any returns or claims for unpackaged products.