Instructions
Mounted Transom Patch for Wall Mount
Product # 701RPF024170
Suitable for top pivot point installation
Mounted transom patch to connect the crosspiece of a lateral glass panel. Can be used with several kinds of adapters, according to the frameless glass door layout to be created.
REQUIRED PRODUCTS
Requires ONE of the following products
OR
TECHNICAL SPECIFICATIONS
Product #
701RPF024170
Finish
Brushed Stainless Steel
Glass Thickness
13/32 to 15/32 in*
Length
6 15/32 in*
Material
Stainless Steel: 304
Height
2 in*
Disclaimer
Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.
APPLICATION
Wall mounted to support a glass crosspiece. By using the correct pivot, the doors can open one-way or two-ways.
IMPORTANT INFORMATION
For safety purposes, use tempered glass. The glass must be shaped according to the section plane provided in the box. Always set the product in a suitable material.
Never exceed the maximum load or size recommended by the manufacturer. Order hardware before starting the job.
This illustration is provided for visual reference only. Actual product may vary. The manufacturer reserves the right to change product and information without notice. Always follow the instructions inside the package.
Drawings and technical documents contain examples of hardware from different manufacturers. The customer may not in any case make a claim following the use of these documents. The Company disclaims any responsibility for the structural details related to a construction or project.
Installation must always be done by qualified personnel.
Never exceed the maximum load or size recommended by the manufacturer. Order hardware before starting the job.
This illustration is provided for visual reference only. Actual product may vary. The manufacturer reserves the right to change product and information without notice. Always follow the instructions inside the package.
Drawings and technical documents contain examples of hardware from different manufacturers. The customer may not in any case make a claim following the use of these documents. The Company disclaims any responsibility for the structural details related to a construction or project.
Installation must always be done by qualified personnel.
