1-1/4" Diameter Solid Metal Standoff Base

To buy, choose from the options below.
Height: 1/4 in 1/2 in 3/4 in 1 in 1 1/2 in 2 in 4 in 6 in 8 in Finish: Bright Polished Chrome Brushed Stainless Steel Chrome Satin Chrome Material: Solid Brass Stainless Steel: 316 Select Options
Product № Height Finish Material
SB125025170 1/4 in Brushed Stainless Steel Stainless Steel: 316
SB125050170 1/2 in Brushed Stainless Steel Stainless Steel: 316
SB125075170 3/4 in Brushed Stainless Steel Stainless Steel: 316
SB125100140 1 in Chrome Solid Brass
SB125100145 1 in Satin Chrome Solid Brass
SB125150170 1 1/2 in Brushed Stainless Steel Stainless Steel: 316
SB125200140 2 in Bright Polished Chrome Solid Brass
SB125200170 2 in Brushed Stainless Steel Stainless Steel: 316
SB125400170 4 in Brushed Stainless Steel Stainless Steel: 316
SB125600170 6 in Brushed Stainless Steel Stainless Steel: 316
SB125800170 8 in Brushed Stainless Steel Stainless Steel: 316

Description

Gaskets not included.

Ideal for signage, displays, presentation and desk tops. Stocked in standard finishes and lengths. Requires 23/32" hole in glass or panel.

TECHNICAL SPECIFICATIONS

Threaded
5/16" - 18
Milling Diameter
23/32 in
Diameter
1 1/4 in

IMPORTANT INFORMATION

For safety purposes, use tempered glass.
The use of power tools during installation may damage the hinges and decorative hardware.
The glass must be shaped according to the section plane provided in the box.
Always set the product in a suitable material.
Never exceed the load or maximum size recommended by the manufacturer.
Never use a spray lubricant on this product.
Maintenance: clean with a soft cloth and non-abrasive soap or ammonia.
This illustration is provided for visual reference only. Actual product may differ from the illustration. Order hardware before starting the job. The manufacturer reserves the right to change product and information without notice. Always use the instructions inside the package.

Drawings and technical documents contain examples of hardware from different manufacturers. The customer may in no case make a claim following the use of these documents. The Company disclaims any responsibility for the structural details related to a construction or project. Installation must be done by qualified personnell. Always make sure that the product is properly installed using suitable fixings to the support material. Never exceed the load or maximum size recommended by the manufacturer. Never use a spray lubricant on this product.

DISCLAIMER

The preceding information as well as any technical recommendation given in writing, verbally or based on tests is provided to the best of our knowledge. However, recommendations are non-binding and do not diminish your responsibility for determining the correctness of these recommendations and the suitability of the product for your particular purpose. The application, use or processing of our products as well as the production of products based on our technical recommendations are beyond our control and therefore exclusively your responsibility. Sales of our products are subject to our most recent General Sales and Delivery Conditions. Please note that Richelieu will not accept any returns or claims for unpackaged products.
1-1/4" Diameter Solid Metal Standoff Base
1-1/4" Diameter Solid Metal Standoff Base
To buy, choose from the options.