To buy, select a product number or choose an option for Height option.

1-3/4" Diameter Solid Metal Standoff Base

Gaskets not included.

These bases (and caps) are drilled and tapped for a 5/16" hangerbolt, ready rod or stud.

Product #

REQUIRED PRODUCTS

Requires ONE of the following products

Hanger bolt Product no. GMSOHB5163Z
  • Length: 3 in
  • Packaging types: Plastic bag
Per unit
OR
Hanger bolt Product no. HZ516134
  • Length: 1 3/4 in
  • Packaging types: Bulk
Box of 1500
OR
Hanger bolt Product no. HZ516134VP
  • Length: 1 3/4 in
  • Packaging types: Plastic box (model VP575)
Box of 25
OR
Hanger bolt Product no. HZ5162
  • Length: 2 in
  • Packaging types: Bulk
Box of 1200
OR
Hanger bolt Product no. HZ516212
  • Length: 2 1/2 in
  • Packaging types: Bulk
Box of 1000
OR
Hanger bolt Product no. HZ516212VP
  • Length: 2 1/2 in
  • Packaging types: Plastic box (model VP580)
Box of 25
OR
Hanger bolt Product no. HZ5162VP
  • Length: 2 in
  • Packaging types: Plastic box (model VP575)
Box of 25
OR
Hanger bolt Product no. HZ5163
  • Length: 3 in
  • Packaging types: Bulk
Box of 800
OR
Hanger bolt Product no. HZ516312
  • Length: 3 1/2 in
  • Packaging types: Bulk
Box of 600
OR
Hanger bolt Product no. HZ516312VP
  • Length: 3 1/2 in
  • Packaging types: Plastic box (model VP591)
Box of 25
OR
Hanger bolt Product no. HZ5163VP
  • Length: 3 in
  • Packaging types: Plastic box (model VP585)
Box of 25
OR
Hanger bolt Product no. HZ5164
  • Length: 4 in
  • Packaging types: Bulk
Box of 600
OR
Hanger bolt Product no. HZ5164VP
  • Length: 4 in
  • Packaging types: Plastic box (model VP591)
Box of 25
OR
Per unit

TECHNICAL SPECIFICATIONS

Diameter 1 3/4 in
Color Stainless Steel
Manufacturing Material Stainless Steel: 316
Threaded 5/16"- 18
Milling Diameter 3/8 in
Finish Brushed
Color Group Metal Group

IMPORTANT INFORMATION

For safety purposes, use tempered glass.
The use of power tools during installation may damage the hinges and decorative hardware.
The glass must be shaped according to the section plane provided in the box.
Always set the product in a suitable material.
Never exceed the load or maximum size recommended by the manufacturer.
Never use a spray lubricant on this product.
Maintenance: clean with a soft cloth and non-abrasive soap or ammonia.
This illustration is provided for visual reference only. Actual product may differ from the illustration. Order hardware before starting the job. The manufacturer reserves the right to change product and information without notice. Always use the instructions inside the package.

Drawings and technical documents contain examples of hardware from different manufacturers. The customer may in no case make a claim following the use of these documents. The Company disclaims any responsibility for the structural details related to a construction or project. Installation must be done by qualified personnell. Always make sure that the product is properly installed using suitable fixings to the support material. Never exceed the load or maximum size recommended by the manufacturer. Never use a spray lubricant on this product.

DISCLAIMER

The preceding information as well as any technical recommendation given in writing, verbally or based on tests is provided to the best of our knowledge. However, recommendations are non-binding and do not diminish your responsibility for determining the correctness of these recommendations and the suitability of the product for your particular purpose. The application, use or processing of our products as well as the production of products based on our technical recommendations are beyond our control and therefore exclusively your responsibility. Sales of our products are subject to our most recent General Sales and Delivery Conditions. Please note that Richelieu will not accept any returns or claims for unpackaged products.
1-3/4" Diameter Solid Metal Standoff Base

To buy, select a product number or choose an option for Height option.