1-1/4" Flush Mount Standoff Cap
Designed to be used with 1-1/4" stand off bases (5/16-18 thread) and with minimum material thickness of 3/8" (9.5 mm). Overall length of fastener is 7/8" (22 mm).
Overall length including plastic insert washer is 1-3/16" (30 mm), overall depth of insert washer 5/16" (8 mm).
- Technical specifications
- Suggested products
- Related documents
- Important Information
- Included Product(s)
|Diameter||1 1/4 in|
|Manufacturing Material||Stainless Steel: 304|
|Color Group||Metal Group|
Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.
The use of power tools during installation may damage the hinges and decorative hardware.
The glass must be shaped according to the section plane provided in the box.
Always set the product in a suitable material.
Never exceed the load or maximum size recommended by the manufacturer.
Never use a spray lubricant on this product.
Maintenance: clean with a soft cloth and non-abrasive soap or ammonia.
This illustration is provided for visual reference only. Actual product may differ from the illustration. Order hardware before starting the job. The manufacturer reserves the right to change product and information without notice. Always use the instructions inside the package.
Drawings and technical documents contain examples of hardware from different manufacturers. The customer may in no case make a claim following the use of these documents. The Company disclaims any responsibility for the structural details related to a construction or project. Installation must be done by qualified personnel. Always make sure that the product is properly installed using suitable fixings to the support material. Never exceed the load or maximum size recommended by the manufacturer. Never use a spray lubricant on this product.