North American SDS
High-Performance Construction Adhesive - E6000
Product # E232021
E6000 is a unique, self-levelling, non-flammable industrial adhesive formulated to meet high performance requirements. It permanently adheres to most surfaces, providing an exceptional bond quality while maintaining its flexibility even in extreme cold temperatures.
ADVANTAGES AND BENEFITS
Flexible - it does not become brittle in cold weather and bonds items subject to vibration
Chemical resistant - safe for applications exposed to dilute acids and dilute caustics
Abrasion resistant - great for bonding objects subject to normal wear
Waterproof - can be submerged in fresh and salt water after complete cure
Paintable - paint to match surrounding area or to make UV resistant
Chemical resistant - safe for applications exposed to dilute acids and dilute caustics
Abrasion resistant - great for bonding objects subject to normal wear
Waterproof - can be submerged in fresh and salt water after complete cure
Paintable - paint to match surrounding area or to make UV resistant
TECHNICAL SPECIFICATIONS
Product #
E232021
Volume
10.2 oz
Base
Solvent
Open Time
20 minutes
Finish/Color
Clear
Viscosity
100 000 cps
Freeze/Thaw Stability
Stable
Features
Non-Flammable, Heavy-Duty, Waterproof, Weatherproof, Self-Leveling, Good Cold Flexibility
Recommended Use
Plastic, Metal, Glass, Fiberglass, Masonry, Leather, Wood, Construction Grade, Concrete, Upholstery, Flooring
APPLICATION
- General facility/building repair
- Flooring repairs
- Locking down fasteners against vibration
- Trailer repair
- Auto upholstery
- Paneling
- Molding
- Flooring repairs
- Locking down fasteners against vibration
- Trailer repair
- Auto upholstery
- Paneling
- Molding
IMPORTANT INFORMATION
Directions for use:
1- Surface should be clean, dry and free of dirt. For best results, lightly roughen surface before use.
2- TUBE: Puncture inner seal using pointer cap (if tube has a foil seal).
CARTRIDGE: Trim end of nozzle. Puncture inner seal. Ideal application temperature range is 50 to 90 °F (10 to 32 °C). However, fully cured adhesive can withstand temperatures from 40 to 180 °F (-40 to 82 °C) intermittently.
3- Apply directly to surfaces to be bonded or repaired.
4- Allow 24 hours for curing. Depending on materials and temperature, maximum bond strength may not be reached for 48 to 72 hours.
5- TUBE: For future easy cap removal, apply a thin coat of petroleum jelly to the threads of the tube before replacing the cap.
CARTRIDGE: For prolonged storage after opening, cover or plug the opening of the nozzle.
6- Clean uncured adhesive with acetone or citrus-based solvents. Cured material may be removed by cutting or scraping.
Note: Product is paintable and immediately resistant to precipitation upon application.
1- Surface should be clean, dry and free of dirt. For best results, lightly roughen surface before use.
2- TUBE: Puncture inner seal using pointer cap (if tube has a foil seal).
CARTRIDGE: Trim end of nozzle. Puncture inner seal. Ideal application temperature range is 50 to 90 °F (10 to 32 °C). However, fully cured adhesive can withstand temperatures from 40 to 180 °F (-40 to 82 °C) intermittently.
3- Apply directly to surfaces to be bonded or repaired.
4- Allow 24 hours for curing. Depending on materials and temperature, maximum bond strength may not be reached for 48 to 72 hours.
5- TUBE: For future easy cap removal, apply a thin coat of petroleum jelly to the threads of the tube before replacing the cap.
CARTRIDGE: For prolonged storage after opening, cover or plug the opening of the nozzle.
6- Clean uncured adhesive with acetone or citrus-based solvents. Cured material may be removed by cutting or scraping.
Note: Product is paintable and immediately resistant to precipitation upon application.
