Non-Sag Industrial Adhesive - E6100

New
Product №: E252011

Description

The E6100 is a unique NON-SAG, non-flammable industrial adhesive formulated to meet high-performance requirements. It permanently adheres to more surfaces than virtually any other adhesive.

TECHNICAL SPECIFICATIONS

Product №
E252011
Volume
10.2 oz
Base
Perchloroethylene
Open Time
20 minutes
Finish/Color
Clear
Viscosity
Up to 1 000 000 cps
Freeze/Thaw Stability
Stable
Features
Non-Flammable, Heavy-Duty, Waterproof, Weatherproof, Good Cold Flexibility, Non-Sag, Paintable, 24h Full Cure
Recommended Use
Metal, Glass, Numerous Other Applications, Fiberglass, Masonry, Leather, Wood, Construction Grade, Concrete, Automotive, Vinyl, Ceramic, Rubber, PVC, Vertical Applications
Solid Content (approx.)
40%
Application Temperature
>10 °C (>50 °F)

APPLICATION

- General construction
- Vertical repairs to brick & mortar
- HVAC systems repair
- locking down fasteners against vibration
- roof flashing/shingles repair
- auto upholstery/paneling/molding
- And much more

ADVANTAGES AND BENEFITS

- Flexible: it does not become brittle in cold weather and bonds items subject to vibration
- Chemical resistant: this product is safe to use for applications exposed to dilute acids and dilute caustics
- Abrasion resistant: it's great for bonding object subject to normal wear
- Waterproof: it can be submerged in fresh and salt water after complete cure
- Paintable after 24h, to help you match the surrounding area or to make it UV resistant
- Temperature resistant: once fully cured, this product can withstand temperatures from -40 to 180 °F (-40 to 82 °C) intermittently.

IMPORTANT INFORMATION

Directions and Application Notes

Step 1:
Ttest small area before use. Surface should be clean, dry and free of dirt. For best results, lightly roughen surface before use.

Step 2:
Trim end of nozzle. Puncture inner seal. Ideal application temperature range is 50 to 90° F (10 to 32° C). However, fully cured adhesive can withstand temperatures from 40 to 180° F (-40 to 82° C) intermittently.

Step 3:
Apply directly to surfaces to be bonded or repaired.

Step 4:
Allow to cure 24 hours. Depending on materials and temperature, maximum bond strength may not be reached for 48 to 72 hours.

Step 5:
For prolonged storage after opening, cover or plug the opening of the nozzle.

Step 6:
Clean uncured adhesive with acetone or citrus-based solvents. Cured material may be removed by cutting or scraping.

Product is paintable and immediately resistant to precipitation upon application.

DISCLAIMER

The product is warranted against any defect in materials or workmanship under normal use for a period of 180 days after the date of purchase. The product is also warranted under any implied warranties provided under applicable state law, including, without limitation, the implied warranty of merchantability and the implied warranty of fitness for a particular purpose, for a period of 180 days after the date of purchase. This warranty covers only the original buyer of the product. For warranty service, the buyer should contact the store where the product was purchased, or write Eclectic Products, Inc., P.O. Box 4450, Pineville LA 71361 or call 800.767.4667. This warranty gives you specific legal rights, and you also have other rights, which vary from state to state.