North American SDS
High-Performance Adhesive Spray - LIONGRIP R065
Product # R0652011L
High-Performance
The Liongrip R065 is a premium flammable spray-grade polychloroprene contact adhesive that is fast drying with high heat resistance and excellent green strength for postforming and flat work. A workhorse product designed for a variety of applications.
ADVANTAGES AND BENEFITS
- Excellent room temperature contact bonds
- Excellent green strength and high heat resistance for postforming applications
- LEED compliant (IEQ Credits & 4.4)
- Meets OTC standards
- Fast drying with a long open time
- Excellent spray characteristics and breakup by hot spraying (49°C/120°F max) or cold spraying
- Bonds HPL, particleboard, plywood, steel, and many plastics
- Excellent green strength and high heat resistance for postforming applications
- LEED compliant (IEQ Credits & 4.4)
- Meets OTC standards
- Fast drying with a long open time
- Excellent spray characteristics and breakup by hot spraying (49°C/120°F max) or cold spraying
- Bonds HPL, particleboard, plywood, steel, and many plastics
TECHNICAL SPECIFICATIONS
Product #
R0652011L
Packing
Bulk/Liquid
Finish/Color
Natural
Base
Neoprene
Volume
5 gal.
Open Time
60 minutes
Dry Time
4 to 7 minutes
VOC Concentration (EPA Method 24)
576 grams per liter
Viscosity
180 - 220 cps
Recommended Coverage
28.79 m²/3.78 l (310 sq. ft/gal)
Solids Content (approximate)
18.5% ± 1%
Freeze/Thaw Stability
Stable
Type
Liquid
Brand
Liongrip
Standards and Certifications
OTC, MIL-A-21366A, Woodwork Institute of California Type II, LEED 4.4
Features
Fast-Drying, High Heat Resistance, Heavy-Duty, Water Resistant, Superior Bond, Long Open Time
Recommended Use
Bathroom / Kitchen, Plastic, Counter, Cabinet, Particleboard, Metal, Fiberglass, Masonry, Wood, Laminates, Veneer, Postforming
APPLICATION
The LIONGRIP R065 is ideal for:
- Bonding decorative plastic laminates (HPL) to particleboard, MDF, plywood, etc.
- The fabrication of postformed kitchen and bathroom countertops
- The fabrication of cabinets
- Millwork
- Store fixtures
- And much more!
The Liongrip R065 can also be used to laminate most porous and non-porous materials such as:
- Sheet metal
- Plywood
- Drywall
- Particleboard
- Polystyrene foam
- Honeycomb cores
- And much more!
* Do Not laminate copper or its alloys with this adhesive.
* Do Not use with unbacked, plasticized vinyls.
Note: The use of plywood as a core material with HPL may void the HPL manufacturer's warranty.
- Bonding decorative plastic laminates (HPL) to particleboard, MDF, plywood, etc.
- The fabrication of postformed kitchen and bathroom countertops
- The fabrication of cabinets
- Millwork
- Store fixtures
- And much more!
The Liongrip R065 can also be used to laminate most porous and non-porous materials such as:
- Sheet metal
- Plywood
- Drywall
- Particleboard
- Polystyrene foam
- Honeycomb cores
- And much more!
* Do Not laminate copper or its alloys with this adhesive.
* Do Not use with unbacked, plasticized vinyls.
Note: The use of plywood as a core material with HPL may void the HPL manufacturer's warranty.
IMPORTANT INFORMATION
Usage
- Do not apply or make bonds at temperatures below 18°C/65°F.
- Use at room temperature (18°C/65°F) or warmer. For best results, use above 22°C/72°F.
Storage
- 12 month shelf life from date of manufacture
- Freeze/Thaw Stable; if chilled below 10°C/50°F, agitate well after first warming to 22°C/72°F
- Store between 10°C/50°F and 32°C/90°F
- Keep container tightly closed and stored off of the floor when not in use
- Avoid exposure of containers to direct sunlight
Clean-up
-Remove adhesive overspray from parts using cleaner RS02020L or Citrus Cleaner RCCAR
- Never use lacquer thinner to thin adhesive or clean equipment
Please see the Technical Data Sheet for more info.
- Do not apply or make bonds at temperatures below 18°C/65°F.
- Use at room temperature (18°C/65°F) or warmer. For best results, use above 22°C/72°F.
Storage
- 12 month shelf life from date of manufacture
- Freeze/Thaw Stable; if chilled below 10°C/50°F, agitate well after first warming to 22°C/72°F
- Store between 10°C/50°F and 32°C/90°F
- Keep container tightly closed and stored off of the floor when not in use
- Avoid exposure of containers to direct sunlight
Clean-up
-Remove adhesive overspray from parts using cleaner RS02020L or Citrus Cleaner RCCAR
- Never use lacquer thinner to thin adhesive or clean equipment
Please see the Technical Data Sheet for more info.
