Technical Datasheet
High-Strength Low-VOC Adhesive Spray - LIONGRIP R075
Product # R07515C
Low-VOC
A high solids, low VOC, long open-time, "California Compliant" contact adhesive canister spray system designed to bond HPL and other decorative overlays to common core materials (particle board, MDF, OSB, etc.)
ADVANTAGES AND BENEFITS
- Low VOC and non-chlorinated
- LEED compliant (IEQ Credits 4.1 & 4.4)
- OTC Compliant
- California Compliant
- Zero HAPs (Hazardous Air Pollutants)
- Long open time with aggressive tack
- Excellent green strength
- High heat resistance
- Very good sprayability
- Portable and convenient
- LEED compliant (IEQ Credits 4.1 & 4.4)
- OTC Compliant
- California Compliant
- Zero HAPs (Hazardous Air Pollutants)
- Long open time with aggressive tack
- Excellent green strength
- High heat resistance
- Very good sprayability
- Portable and convenient
TECHNICAL SPECIFICATIONS
Product #
R07515C
Packing
Aerosol
Finish/Color
Clear
Base
Synthetic Rubber
Volume
15 oz
Open Time
60 minutes
Dry Time
5 to 7 minutes
VOC Concentration (EPA Method 24)
< 40%
Recommended Coverage
2,97-3,72 m²/444 ml (32-40 sq. ft/15 oz)
Freeze/Thaw Stability
Stable
Brand
Liongrip
Standards and Certifications
SCAQMD, OTC, HAPS-Free, California Air District Regulations, LEED 4.4, LEED 4.1
Features
Fast-Drying, High Heat Resistance, Low VOC (less than 250 g/l), Superior Bond, Long Open Time
Recommended Use
Foam and Fabric, Plastic, Cabinet, Metal, Fiberglass, Wood, Laminates, Veneer, Thick Decorative Paper, Upholstery
APPLICATION
The LIONGRIP R075 is ideal for:
- Lamination of HPL to particleboard and/or MDF core materials
- The fabrication of store fixtures
- Millwork
- Cabinets
- Work surfaces
- Decorative panels
- And much more!
The LIONGRIP R075 can also be used for the lamination of a wide range of overlay materials including
- Decorative metal
- Foams
- Fabrics
- Backed upholstery vinyls
to wood based products, metal and rigid plastic core materials.
* Do Not use with unbacked, plasticized vinyls.
Note: The use of plywood as a core material with HPL may void the HPL manufacturers warranty
- Lamination of HPL to particleboard and/or MDF core materials
- The fabrication of store fixtures
- Millwork
- Cabinets
- Work surfaces
- Decorative panels
- And much more!
The LIONGRIP R075 can also be used for the lamination of a wide range of overlay materials including
- Decorative metal
- Foams
- Fabrics
- Backed upholstery vinyls
to wood based products, metal and rigid plastic core materials.
* Do Not use with unbacked, plasticized vinyls.
Note: The use of plywood as a core material with HPL may void the HPL manufacturers warranty
IMPORTANT INFORMATION
Usage
- Use at room temperature (18°C/65°F) or warmer; for best results, use above 21°C/72°F
- Do not apply or make bonds at temperatures below 18°C/65°F
Storage
- 12 month shelf life from date of manufacture
- Freeze/Thaw Stable; if chilled below 5°C/41°F, agitate well after first warming to 22°C/72°F
- Store between 10°C/50°F and 32°C/90°F
- Keep container tightly closed and store off of the floor when not in use
- Avoid exposure of canisters to direct sunlight
Clean-up
-Remove adhesive overspray from parts using cleaner RS02020L or Citrus Cleaner RCCAR.
Please see the Technical Data Sheet for more info.
- Use at room temperature (18°C/65°F) or warmer; for best results, use above 21°C/72°F
- Do not apply or make bonds at temperatures below 18°C/65°F
Storage
- 12 month shelf life from date of manufacture
- Freeze/Thaw Stable; if chilled below 5°C/41°F, agitate well after first warming to 22°C/72°F
- Store between 10°C/50°F and 32°C/90°F
- Keep container tightly closed and store off of the floor when not in use
- Avoid exposure of canisters to direct sunlight
Clean-up
-Remove adhesive overspray from parts using cleaner RS02020L or Citrus Cleaner RCCAR.
Please see the Technical Data Sheet for more info.
