Technical Datasheet
High-Temp Multi-Purpose Adhesive - Bondseal Ultimate
Product # 16061784
Bondseal Ultimate contact non-chlorinated aerosol is based on the latest advances in halogen-free adhesive technology. A new generation synthetic rubber/resin product, high solids with a low solvent formula produces superior heat resistance combined with stronger bonding properties compared to conventional general purpose adhesives.
ADVANTAGES AND BENEFITS
- High temperature resistance up to 110 °C (230 °F)
- Fast drying
- Once dried, a totally nonflammable bond is achieved
- Water resistant
- Chemical resistance to dilute acids, alkalis, and aliphatic oils
- The only flammable components are the propellant and the solvent carrier, once they have evaporated a totally non-flammable bond is achieved.
- Fast drying
- Once dried, a totally nonflammable bond is achieved
- Water resistant
- Chemical resistance to dilute acids, alkalis, and aliphatic oils
- The only flammable components are the propellant and the solvent carrier, once they have evaporated a totally non-flammable bond is achieved.
TECHNICAL SPECIFICATIONS
Product #
16061784
Packing
Aerosol
Base
Solvent
Volume
17 oz
Open Time
3 to 15 minutes
Dry Time
15 to 30 minutes
Working Temperature
15 °C to 25 °C
Features
High Heat Resistance, High Solids, Non-Flammable, Superior Bond
Recommended Use
Cabinet, Laminates, Veneer, Concrete, Upholstery, Automotive, Flooring
Dried Film
Translucent Brown
APPLICATION
Bondseal Ultimate is ideal for:
- Contract flooring
- Exhibitions
- Carpet laying
- Furniture manufacture
- Reupholstering
- Laminating
- Veneering
- Shop fitting
- Joinery
- Marine and RV industries
- And more
- Contract flooring
- Exhibitions
- Carpet laying
- Furniture manufacture
- Reupholstering
- Laminating
- Veneering
- Shop fitting
- Joinery
- Marine and RV industries
- And more
IMPORTANT INFORMATION
All surfaces should be free of contamination by dust, grease, oils, or release agents. Foams should be checked for contamination by mold release or cutting agents. Cleaning solutions, if used, must be allowed to evaporate before application of the adhesive.
