Technical data sheet
High Temperature, High Strength Adhesive Spray - LIONGRIP R015NF
Product # R015NF35C
R 015NF is a high temperature, high strength spray adhesive. It has high bond strength and excellent adhesion to a variety of substrates including, but not limited to laminates, particle board, plywood, hardwood, leather, rubber and metal. It is fast drying with high heat resistance and excellent room temperature contactability in a portable system.
Product # | Finish/Color | Weight |
---|---|---|
R015NF35C | Clear Transparent | 35 lb |
R015NF35G | Green | 35 lb |
R015NF326G | Green | 326 lb |
ADVANTAGES AND BENEFITS
- High heat resistance
- High performance
- Fast grab
- Easy and uniform coverage
- High tack and excellent contactability
- Aerosol format features adjustable spray force, other formats adjust the spray force via the spray gun
- High performance
- Fast grab
- Easy and uniform coverage
- High tack and excellent contactability
- Aerosol format features adjustable spray force, other formats adjust the spray force via the spray gun
TECHNICAL SPECIFICATIONS
Product #
R015NF35C
Packing
Canister
Open Time
45 minutes
Dry Time
3 to 4 minutes
VOC Concentration (EPA Method 24)
22 grams per liter
Brand
Liongrip
Features
High Heat Resistance, Low VOC (less than 250 g/l), Non-Flammable
Coverage Rate
3.0 dry grams/sq. ft. minimum
Flash Point
N/A
APPLICATION
Designed for bonding a wide variety of materials including, but not limited to:
- Decorative Laminates
- Metals (but not copper or its alloys)
- Plywood
- Particle board
- Polyurethane foam
- Rigid plastics.
To clean off excess glue, use LIONGRIP cleaner #RS02020L or RCCAR13C.
- Decorative Laminates
- Metals (but not copper or its alloys)
- Plywood
- Particle board
- Polyurethane foam
- Rigid plastics.
To clean off excess glue, use LIONGRIP cleaner #RS02020L or RCCAR13C.
IMPORTANT INFORMATION
This material is considered hazardous by the OSHA Hazard Communication Standard (29 CFR 1910.1200)
Do not use on copper substrates. Do no apply using equipment that is made of or contains parts made of copper or aluminum.
Do not use on copper substrates. Do no apply using equipment that is made of or contains parts made of copper or aluminum.