North American SDS
Non-Flammable, High Strength Adhesive Spray - LIONGRIP R095NF
Product # R095NF35C
Non-Flammable
The Liongrip R095NF is a non flammable, LEED-compliant canister spray system. It has excellent spray pattern control and is designed to bond HPL and other decorative overlays to common core materials (particle board, MDF, OSB, etc.).
ADVANTAGES AND BENEFITS
- Non-flammable canister system
- LEED compliant (IEQ Credits 4.1 & 4.4)
- OTC Compliant
- Fully adjustable, even spray pattern from 1"-8"
- High tack
- Excellent room temperature contact bonds
- Excellent green strength and high heat resistance
- Fast drying with a long open time
- LEED compliant (IEQ Credits 4.1 & 4.4)
- OTC Compliant
- Fully adjustable, even spray pattern from 1"-8"
- High tack
- Excellent room temperature contact bonds
- Excellent green strength and high heat resistance
- Fast drying with a long open time
TECHNICAL SPECIFICATIONS
Product #
R095NF35C
Packing
Canister
Finish/Color
Clear
Base
Synthetic Rubber
Weight
15.9 kg*
Open Time
60 minutes
Dry Time
4 to 7 minutes
VOC Concentration (EPA Method 24)
6 grams per liter
Recommended Coverage
92.9-111.5 m²/15.8 (1000-1200 sq ft/35 lb)
Brand
Liongrip
Standards and Certifications
SCAQMD, OTC, California Air District Regulations, LEED 4.4, LEED 4.1
Features
Fast-Drying, High Heat Resistance, Low VOC (less than 250 g/l), Non-Flammable, Heavy-Duty, Superior Bond, Long Open Time
Recommended Use
Bathroom / Kitchen, Plastic, Wood Windows, Counter, Cabinet, Particleboard, Metal, Glass, Fiberglass, Masonry, Laminates, Veneer
Disclaimer
Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.
APPLICATION
The LIONGRIP R095NF is ideal for:
- The lamination of High Performance Laminate (HPL) to particleboard and/or MDF core materials
- The fabrication of store fixtures
- Millwork
- Cabinets
- Work surfaces
- Decorative panels
- And much more!
The LIONGRIP R095NF can also be used in the lamination of a wide range of porous and non-porous materials to themselves and each other, including but not limited to:
- HPL
- Melamine
- Wood veneer
- Decorative metal overlays
- Decorative plastic overlays
- Foam
- Fabric
- Some rubbers
- Some plastics
*Do Not use with unbacked, plasticized vinyls.
Note: The use of plywood as a core material with HPL may void the HPL manufacturers warranty.
- The lamination of High Performance Laminate (HPL) to particleboard and/or MDF core materials
- The fabrication of store fixtures
- Millwork
- Cabinets
- Work surfaces
- Decorative panels
- And much more!
The LIONGRIP R095NF can also be used in the lamination of a wide range of porous and non-porous materials to themselves and each other, including but not limited to:
- HPL
- Melamine
- Wood veneer
- Decorative metal overlays
- Decorative plastic overlays
- Foam
- Fabric
- Some rubbers
- Some plastics
*Do Not use with unbacked, plasticized vinyls.
Note: The use of plywood as a core material with HPL may void the HPL manufacturers warranty.
IMPORTANT INFORMATION
Usage
- Use at room temperature (18°C/65°F) or warmer; for best results, use above 21°C/72°F
- Do not apply or make bonds at temperatures below 18°C/65°F
Storage
- 12 month shelf life from date of manufacture
- Freeze/Thaw Stable; if chilled below 5°C/41°F, agitate well after first warming to 22°C/72°F
- Store between 10°C/50°F and 32°C/90°F
- Keep container tightly closed and store off of the floor when not in use
- Avoid exposure of canisters to direct sunlight
Clean-up
-Remove adhesive overspray from parts using cleaner RS02020L or Citrus Cleaner RCCAR.
Please see the Technical Data Sheet for more info.
- Use at room temperature (18°C/65°F) or warmer; for best results, use above 21°C/72°F
- Do not apply or make bonds at temperatures below 18°C/65°F
Storage
- 12 month shelf life from date of manufacture
- Freeze/Thaw Stable; if chilled below 5°C/41°F, agitate well after first warming to 22°C/72°F
- Store between 10°C/50°F and 32°C/90°F
- Keep container tightly closed and store off of the floor when not in use
- Avoid exposure of canisters to direct sunlight
Clean-up
-Remove adhesive overspray from parts using cleaner RS02020L or Citrus Cleaner RCCAR.
Please see the Technical Data Sheet for more info.
