North American SDS
Carpenter's Yellow Wood Glue - LIONGRIP ELITE
To add to cart, choose from the options below.
Yellow PVA Adhesive
The LIONGRIP ELITE is a polyvinyl acetate base adhesive designed for cabinets, furniture, carpentry work and other indoor gluing projects. It has excellent initial grip and reduced slip during assembly. Forms strong bonds on hardwood, softwood, plywood, natural wood composites, MDF, cardboard and other porous materials.
ADVANTAGES AND BENEFITS
- Ideal adhesive for all carpenters and woodworkers
- Excellent sandability
- Strength: 4,000 lbs
- Excellent initial grip
- Reduced slip during assembly
- Contains no added urea-formaldehyde resin
- Easy clean-up
- Excellent sandability
- Strength: 4,000 lbs
- Excellent initial grip
- Reduced slip during assembly
- Contains no added urea-formaldehyde resin
- Easy clean-up
TECHNICAL SPECIFICATIONS
Recommended Use
Interior, Cabinet, Particleboard, Thick Decorative Paper, Furniture, Carpentry, Hard Wood, Sot Wood, Natural Wood Composites, MDF, Cardboard
Color Before Application
Cream
Dried Film
Clear
Open Time
10 to 20 minutes
Close assembly time under pressure
10 to 20 minutes
Viscosity
5000 - 6000 cps
Brand
Liongrip
Features
Low VOC (less than 250 g/l), Superior Bond, Wash with Water
VOC Concentration (EPA Method 24)
< 30 grams/Liter
Standards and Certifications
LEED
Recommended Coverage
22,30 m²/3,78 l (240 sq ft/gal)
Solid Content (Approx.)
40% to 42%
Base
Polyvinyl Acetate
APPLICATION
Preparation
- Mix well before using
- Material and room temperature should be above 18°C/64°F.
- All surfaces to be glued must be clean and dry.
- Best bonds are obtained when moisture content of wood is between 8% and 12%.
Application
- Apply directly from the bottle or using a glue brush or a mechanical glue spreader onto one of the surfaces; joints must be tight fitting
- Spread glue to result in squeeze out when parts are assembled
- Clamp or press using sufficient pressure. Dries light translucent yellow.
- Allow to dry before sanding.
Guidelines (AT 20°C & 50% RH)
Assembly time: 10 to 20 minutes
Clamp time: 30 to 60 minutes
Drying time: 6 to 8 hours
Spread rate: approx. 6 sq. m./L (240 sq. ft/ gallon)
- Mix well before using
- Material and room temperature should be above 18°C/64°F.
- All surfaces to be glued must be clean and dry.
- Best bonds are obtained when moisture content of wood is between 8% and 12%.
Application
- Apply directly from the bottle or using a glue brush or a mechanical glue spreader onto one of the surfaces; joints must be tight fitting
- Spread glue to result in squeeze out when parts are assembled
- Clamp or press using sufficient pressure. Dries light translucent yellow.
- Allow to dry before sanding.
Guidelines (AT 20°C & 50% RH)
Assembly time: 10 to 20 minutes
Clamp time: 30 to 60 minutes
Drying time: 6 to 8 hours
Spread rate: approx. 6 sq. m./L (240 sq. ft/ gallon)
IMPORTANT INFORMATION
- Not recommended for structural applications (such as load bearing parts in building structures)
- Shelf life is 18 months at room temperature in original unopened container
- Store indoor in a cool, dry location between 10°C/50°F and 35°C/95°F
- Keep container closed when not in use
- Shelf life is 18 months at room temperature in original unopened container
- Store indoor in a cool, dry location between 10°C/50°F and 35°C/95°F
- Keep container closed when not in use
DISCLAIMER
Our personnel is available to help purchasers obtain best results from our products, and recommendations are based on tests and information believed to be reliable. However, since we have no control over the conditions under which our products are transported, stored, handled, or used by purchasers, all recommendations and sales are made on conditions that we will not be held liable for any damages resulting from their use. No representative of ours has any authority to waive or change this provision.
