North American SDS
LAMINATING 50 - HOT/COLD PINCH ROLL LAMINATION
To add to cart, choose from the options below.
LAMINATING 50 is a vinyl acetate copolymer adhesive designed to bond HPL to particleboard and fiberboard. It can be used in a variety of applications including continuous heated-panel laminating systems, pinch roll and dead stack or limited lay-up time cold-press operations. The adhesive has high green strength and tensile strength.
ADVANTAGES AND BENEFITS
KEY PRODUCT FEATURES
- Excellent in heated nip roll and dead stack operations
- Can be cold pressed
- Can be applied by spraying
- Great green strength and tensile strength
- Excellent in heated nip roll and dead stack operations
- Can be cold pressed
- Can be applied by spraying
- Great green strength and tensile strength
TECHNICAL SPECIFICATIONS
Recommended Use
Particleboard, Fiberboard
Viscosity
3500 cps
Brand
Franklin Industrial
Features
Heavy-Duty
Base
Vinyl Acetate
Production Time
Special online order - 14 days
APPLICATION
Spread of 22 to 29 pounds of adhesive per 1,000 square feet or 10 to 13 grams per square foot of glue line is adequate. Verify adequate glue coverage by monitoring for squeeze out along the glue line once the panels are under pressure.
The assembly time is influenced by many factors, some of which include glue spread, moisture content of the stock, porosity of the stock, environmental conditions and adhesive choice. Assembly times of five to ten minutes are approximate. It is desirable to see a bead of adhesive squeeze out around the perimeter of the bottom panel of the stack
The assembly time is influenced by many factors, some of which include glue spread, moisture content of the stock, porosity of the stock, environmental conditions and adhesive choice. Assembly times of five to ten minutes are approximate. It is desirable to see a bead of adhesive squeeze out around the perimeter of the bottom panel of the stack
