Technical data sheet
White Glue - LIONGRIP 1000
To add to cart, choose from the options below.
LIONGRIP 1000 is a general purpose woodworking adhesive for general wood assembly and edge gluing of soft and hard wood species.
ADVANTAGES AND BENEFITS
- Fast gripping action
- Less slippage
- Robust and durable adhesion
- Excellent sandability
- Well suited for roller, brush, and squeeze bottle applications
- Tight and aesthetic glue lines
- Forgiving in production environment
- Less rejects due to adhesive pre-cure
- Good gap filling properties
- Strong wet tack
- 3500 PSI block shear values
- Contains UV fluorescent tracer
- Less slippage
- Robust and durable adhesion
- Excellent sandability
- Well suited for roller, brush, and squeeze bottle applications
- Tight and aesthetic glue lines
- Forgiving in production environment
- Less rejects due to adhesive pre-cure
- Good gap filling properties
- Strong wet tack
- 3500 PSI block shear values
- Contains UV fluorescent tracer
TECHNICAL SPECIFICATIONS
Recommended Use
Interior, General-Use Glue
Color Before Application
White
Dried Film
Translucent
Open Time
5 minutes, 10 to 15 minutes
Close assembly time under pressure
15 to 20 minutes
Viscosity
7 000 - 7 500 cps
Brand
Liongrip
Features
Solvent Resistant, Fast-Drying, Fluorescent, High Heat Resistance, Low VOC (less than 250 g/l)
VOC Concentration (EPA Method 24)
30 grams per liter
Standards and Certifications
UL2762
Solid Content (Approx.)
40%
Base
Water Based
pH
4.0 to 5.0
APPLICATION
- Application temperature: Above 12°C (50°F)
- Open assembly time: 5 minutes ( 21°C(70°F)/ 50%RH)
- Closed assembly time: 10-15 minutes ( 21°C(70°F) /50% RH)
- Application Spread Rate: Approximately 8 wet mils or 18 kilograms /1000f² per gallon
- Clamping pressures: Typical pressures are generally 155-175 psi for softwoods and 200-225 psi for hardwoods. Excessive pressure will evacuate adhesive and starve the glue line.
- Application methods: May be applied by squeeze bottles or by brush for detailed applications or by conventional roller glue spreaders.
- Cleanup: Damp cloth while glue is wet. Scrape off and sand dried excess.
- Open assembly time: 5 minutes ( 21°C(70°F)/ 50%RH)
- Closed assembly time: 10-15 minutes ( 21°C(70°F) /50% RH)
- Application Spread Rate: Approximately 8 wet mils or 18 kilograms /1000f² per gallon
- Clamping pressures: Typical pressures are generally 155-175 psi for softwoods and 200-225 psi for hardwoods. Excessive pressure will evacuate adhesive and starve the glue line.
- Application methods: May be applied by squeeze bottles or by brush for detailed applications or by conventional roller glue spreaders.
- Cleanup: Damp cloth while glue is wet. Scrape off and sand dried excess.
