North American SDS
Yellow Glue - LIONGRIP 3000
Product # R30004511
LIONGRIP 3000 is a general purpose yellow carpenters glue specifically formulated for cabinet and furniture assembly and panel edge gluing.
ADVANTAGES AND BENEFITS
- Fast gripping action
- Less slippage
- Reduction in clamp times
- Excellent sandabilty
- Less glue sagging
- Strong wet tack
- Fast drying time
- Very hard glue line
- High viscosity
- Contains UV fluorescent tracer
- Less slippage
- Reduction in clamp times
- Excellent sandabilty
- Less glue sagging
- Strong wet tack
- Fast drying time
- Very hard glue line
- High viscosity
- Contains UV fluorescent tracer
TECHNICAL SPECIFICATIONS
Product #
R30004511
Recommended Use
Interior, General-Use Glue
Color Before Application
Yellow
Dried Film
Translucent
Open Time
5 minutes
Viscosity
6000 - 7000 cps
Volume
45 gal.
Brand
Liongrip
Features
Solvent Resistant, Fast-Drying, Fluorescent, High Heat Resistance, Low VOC (less than 250 g/l), Indirect Contact with Food
VOC Concentration (EPA Method 24)
10.7 grams per liter
Solid Content (Approx.)
40%
Base
Aliphatic Resin Emulsion
pH
4.0 to 5.0
Freeze/Thaw Stability
Keep From Freezing
APPLICATION
- Application temperature: Above 12°C (50°F)
- Open assembly time: 5 minutes ( 21°C(70°F)/ 50%RH)
- Closed assembly time: 10-15 minutes ( 21°C(70°F) /50% RH)
- Application Spread Rate: Approximately 8 wet mils or 18 kilograms /1000f² per gallon
- Clamping pressures: Typical pressures are generally 150-165 psi for softwoods and 200-225 psi for hardwoods. Excessive pressure will evacuate adhesive and starve the glue line.
- Application methods: May be applied by squeeze bottles or by brush for detailed applications or by conventional roller glue spreaders.
- Cleanup: Damp cloth while glue is wet. Scrape off and sand dried excess.
- Open assembly time: 5 minutes ( 21°C(70°F)/ 50%RH)
- Closed assembly time: 10-15 minutes ( 21°C(70°F) /50% RH)
- Application Spread Rate: Approximately 8 wet mils or 18 kilograms /1000f² per gallon
- Clamping pressures: Typical pressures are generally 150-165 psi for softwoods and 200-225 psi for hardwoods. Excessive pressure will evacuate adhesive and starve the glue line.
- Application methods: May be applied by squeeze bottles or by brush for detailed applications or by conventional roller glue spreaders.
- Cleanup: Damp cloth while glue is wet. Scrape off and sand dried excess.
