Technical data sheet
DAP® 100% Silicone Sealant
To add to cart, choose from the options below.
Window, Door & Siding Sealant
DAP® 100% Silicone Window, Door & Siding Sealant is an all-purpose, one component, acetoxy cure sealant ideal for indoor/outdoor use.
It provides a watertight, flexible seal that won't crack, crumble or shrink. Once cured, it is unaffected by temperature extremes (-40 °F to 400 °F).
It provides a watertight, flexible seal that won't crack, crumble or shrink. Once cured, it is unaffected by temperature extremes (-40 °F to 400 °F).
| Product # | Finish/Color |
|---|---|
| GLU8649 | Almond |
| GLU8641 | Clear Transparent |
| GLU8646 | White |
ADVANTAGES AND BENEFITS
- Offers superior quality, long-lasting flexibility and excellent adhesion with a flexible watertight seal
- 50-year durability guarantee
- Superior quality, multi-purpose sealant
- Provides a weatherproof, watertight seal with excellent adhesion
- Resists cracking, crumbling and chalking
- Interior or exterior use
- 50-year durability guarantee
- Superior quality, multi-purpose sealant
- Provides a weatherproof, watertight seal with excellent adhesion
- Resists cracking, crumbling and chalking
- Interior or exterior use
TECHNICAL SPECIFICATIONS
Brand
DAP
Base
100% RTV Silicone, Acetoxy Silicone
Optimal Adherence to
Fiberglass, Glass, Tile, Non-oiled Wood, Plastic, Rubber, Painted metal
Features
Heavy-Duty, Water Resistant, Weatherproof, Good Cold Flexibility, Low Sag
Skin Formation Over Time/Dry to the Touch
10 to 20 minutes
Tooling Time
5 to 10 minutes
Packaging Specifications
Plastic Cartridge
VOC Concentration (EPA Method 24)
28 grams per liter
Recommended Use
Interior, Exterior, Marine / Recreative Vehicle, Aluminum Windows, Wood Windows, Exterior Trim and Siding, Vinyl/PVC Windows
Volume
9.8 oz
Freeze/Thaw Stability
Stable
APPLICATION
- Ideal for sealing window and door frames, house siding and trim, shutters, vents and marine applications
Optimal adherence:
- Glass
- Ceramic
- Fiberglass
- Porcelain
- Non-oily woods
- Canvas
- Most metals (see For Best Results section)
- Most plastics and rubbers
- Painted surfaces
Optimal adherence:
- Glass
- Ceramic
- Fiberglass
- Porcelain
- Non-oily woods
- Canvas
- Most metals (see For Best Results section)
- Most plastics and rubbers
- Painted surfaces
IMPORTANT INFORMATION
When tested in accordance with ASTM C719, meets C920 specification for Class 25, Uses G & A* (*Use A does not include Clear)
For Best Results:
- Application temperature is between -35 °F and 140 °F.
- Joint width should not exceed 1/2". If joint depth exceeds 1/2", use backer rod material.
- Not paintable. Paint surfaces before sealing.
- Not recommended for continuous underwater use, below grade use, use on wet surfaces, oily woods, stovepipes or chimneys. Not for fireplace applications, tuck pointing, butt joints, structural glazing or repairing surface defects.
- Not recommended for use on cementitious materials or surfaces that might bleed oils, plasticizers or solvents. Substrates made of methylmethacrylate, polycarbonate, polypropylene, polyethylene and polytetrafluoroethylene do not allow for best adhesion and compatibility with sealant. Try test area before using.
- Not recommended for use on brass, copper, magnesium, zinc, iron, galvanized metals or other surfaces prone to attack by weak acids.
- Do not use where abrasion and physical abuse are encountered.
- Store in temperatures below 90 °F in a dry place.
For Best Results:
- Application temperature is between -35 °F and 140 °F.
- Joint width should not exceed 1/2". If joint depth exceeds 1/2", use backer rod material.
- Not paintable. Paint surfaces before sealing.
- Not recommended for continuous underwater use, below grade use, use on wet surfaces, oily woods, stovepipes or chimneys. Not for fireplace applications, tuck pointing, butt joints, structural glazing or repairing surface defects.
- Not recommended for use on cementitious materials or surfaces that might bleed oils, plasticizers or solvents. Substrates made of methylmethacrylate, polycarbonate, polypropylene, polyethylene and polytetrafluoroethylene do not allow for best adhesion and compatibility with sealant. Try test area before using.
- Not recommended for use on brass, copper, magnesium, zinc, iron, galvanized metals or other surfaces prone to attack by weak acids.
- Do not use where abrasion and physical abuse are encountered.
- Store in temperatures below 90 °F in a dry place.
