COMPACT BLUMOTION Hinge 38N 105°

Product # 38N355B12180
The COMPACT BLUMOTION hinge has been specially designed for framed cabinets. The soft closing function is integrated directly into the hinge housing and can be deactivated for small or light doors. With COMPACT BLUMOTION, the doors always close quietly.

The BLUMOTION function can easily be deactivated on a hinge, allowing small or light doors to close with the same high quality of movement.
Overlay: 3/4 in 3/8 in 1/2 in Fixing Type: Screw-On Knock-In with Insertion Ram Only Mounting Type: Wrap-around Mount Screw/Nail: Not included Packaging format: Per unit Modify Options
Product # Overlay Fixing Type Mounting Type Screw/Nail Packaging format
38N355B12180 3/4 in Screw-On Wrap-around Mount Not included Per unit
38N358B05180 5/16 in Knock-In with Insertion Ram Only Wrap-around Mount Not included Per unit
38N358B06180 3/8 in Knock-In with Insertion Ram Only Wrap-around Mount Not included Per unit
38N355B06180 3/8 in Screw-On Wrap-around Mount Not included Per unit
38N358BE08180 1/2 in Knock-In with Insertion Ram Only Edge Mount Not included Per unit
38N358B08180 1/2 in Knock-In with Insertion Ram Only Wrap-around Mount Not included Per unit
38N355BE08180 1/2 in Screw-On Edge Mount Not included Per unit
BP38N355B08180U 1/2 in Screw-On Wrap-around Mount Included Bag
AP38N355B08180U 1/2 in Screw-On Wrap-around Mount Included Bag of 10 units
38N355B08180 1/2 in Screw-On Wrap-around Mount Not included Per unit
38N358B10180 5/8 in Knock-In with Insertion Ram Only Wrap-around Mount Not included Per unit
38N358B12180 3/4 in Knock-In with Insertion Ram Only Wrap-around Mount Not included Per unit

ADVANTAGES AND BENEFITS

- BLUMOTION soft-close integrated into the hinge cup
- Deactivation switch for small/light doors
- Overload safety feature
- One-piece wraparound hinge
- 7/16 po (11 mm) cup depth

TECHNICAL SPECIFICATIONS

Product #
38N355B12180
Hinge Type
COMPACT BLUMOTION
Brand
Blum
Finish
Nickel
Material
Steel
Milling Diameter
1 3/8 in*
Use Type
Standard Door
Cabinet Type
Face Frame
Door Position
Half Overlay
Cabinet Thickness
Min. 5/8 in*
Door Thickness
5/8 in*
Closing Mechanism
Soft-Closing
Milling Depth
7/16 in*
Hinge Opening Angle
+105°
Disclaimer

Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.

IMPORTANT INFORMATION

The best way to clean your Blum fittings is as follows:

- Use a soft, lint-free cloth, a chamois leather or a sponge
- Ensure that the material you use to wipe the furniture with is just damp, not wet
- Always wipe the furniture again afterwards with a dry cloth
- If possible, use cleaning products intended specifically for materials such as leather, stainless steel etc.; otherwise, use only clean water
- Wipe off dirt as soon as it appears

AVOID THE FOLLOWING:

- using steam cleaners
- using cleaning products, such as abrasive cleaning powder, steel wool and scourers, as well as cleaning agents, such as acetone, chlorine, cellulose thinner and solutions whose names start with tri or tetra
- storing open cleaning products, baking powder, dishwasher products or table salt, for example. Fumes can cause corrosion on all metal surfaces.

APPLICATION

- For the installation of a door on a piece of furniture and/or a cabinet.

- Blum hinges are not made of stainless steel, therefore it is not recommended to use them for outdoor applications.

RELATED DOCUMENTS