CONCEPTA Hinge Set with Damper
Product # 189S27654
Set
R-Store program with soft close damper
The CONCEPTA Hinge Set with a soft close damper to connect the door to the retractable mechanism. This set is packaged in a bag of 3 hinges. The hinge is fully adjustable and mounts to the vertical profile of the retractable mechanism. The door machining is similar to a typical euro-style concealed hinge, 35mm diameter X 14mm deep. Refer to the Hawa Planning Tool calculator to determine the location and quantity of hinges per door.
For wood door.
For wood door.
TECHNICAL SPECIFICATIONS
Product #
189S27654
Hinge Opening Angle
+100°
Closing Mechanism
Soft-Closing
Material
Steel
Door Thickness
3/4 to 1 31/32 in*
Brand
Concepta
Load Capacity
33.1 to 110 lb*
Disclaimer
Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.
IMPORTANT INFORMATION
IMPORTANT:
- Refer to the Hawa Planning Tool calculator to determine the location
- Use metric dimensions for greater accuracy during installation.
- Please make sure to read the entirety of the installation manual before proceeding with the installation.
- Use metric dimensions for greater accuracy during installation
- Wear safety gear such as gloves, safety glasses, safety shoes, and ear protection
- Every fastener used to attach the track to the wall must be fastened securely to a structural surface.
- Always remove debris/dust/residues (sawdust and/or aluminum) from all tracks and guide channels using a dry cloth during installation and before operating the system.
- Never spray lubricant on this product.
- Do not exceed stated limitations and parameters. This will cause early wear and performance failure.
- Refer to the Hawa Planning Tool calculator to determine the location
- Use metric dimensions for greater accuracy during installation.
- Please make sure to read the entirety of the installation manual before proceeding with the installation.
- Use metric dimensions for greater accuracy during installation
- Wear safety gear such as gloves, safety glasses, safety shoes, and ear protection
- Every fastener used to attach the track to the wall must be fastened securely to a structural surface.
- Always remove debris/dust/residues (sawdust and/or aluminum) from all tracks and guide channels using a dry cloth during installation and before operating the system.
- Never spray lubricant on this product.
- Do not exceed stated limitations and parameters. This will cause early wear and performance failure.
