Instructions
AVENTOS HS and HS top Opening Mechanism
To add to cart, choose from the options below.
- Ideal for wide, one-piece fronts
- Also suitable for tall cabinets with cornices and arches
- Easy opening, seamless stop, and soft, silent closing thanks to the integrated BLUMOTION dampening
- Precise and harmonious gap adjustment through three-dimensional front adjustment
- Quick assembly and disassembly thanks to the CLIP technology
- Can be combined with SERVO-DRIVE for handle-free fronts
Blum AVENTOS HS for lift-up flap doors. Fitting for lift-up flap doors. Suitable for wooden fronts, wide and narrow aluminum frames, and thin fronts starting at 8 mm. Symmetrical power mechanism with spring packs. The lift-up flap door stops in any position thanks to the continuous adjustment of the power mechanism. High stability for large and wide fronts thanks to the cross stabilizer. Integrated dampening for both opening and closing. Removable arm pack. Quick, easy, and tool-free front assembly using clip technology. The power mechanism can also be installed on the free side of the cabinet. No protruding parts above the cabinet. Compatible with the SERVO-DRIVE electrical motion support system.
For cabinet heights of 350 to 800 mm and widths up to 1,800 mm.
Three-dimensional front adjustment: Height ± 2 mm, Side ± 2 mm, Depth ± 2 mm.
AVENTOS HS top improvements:
- Compact fitting
- Requires only a shallow cabinet depth of 264 mm
- Convenient and easy power mechanism adjustment from the front
- NO cross stabilizer required
- Suitable for wooden fronts, wide/narrow aluminum frames, thin fronts, miter, and rebated applications
- Also suitable for tall cabinets with cornices and arches
- Easy opening, seamless stop, and soft, silent closing thanks to the integrated BLUMOTION dampening
- Precise and harmonious gap adjustment through three-dimensional front adjustment
- Quick assembly and disassembly thanks to the CLIP technology
- Can be combined with SERVO-DRIVE for handle-free fronts
Blum AVENTOS HS for lift-up flap doors. Fitting for lift-up flap doors. Suitable for wooden fronts, wide and narrow aluminum frames, and thin fronts starting at 8 mm. Symmetrical power mechanism with spring packs. The lift-up flap door stops in any position thanks to the continuous adjustment of the power mechanism. High stability for large and wide fronts thanks to the cross stabilizer. Integrated dampening for both opening and closing. Removable arm pack. Quick, easy, and tool-free front assembly using clip technology. The power mechanism can also be installed on the free side of the cabinet. No protruding parts above the cabinet. Compatible with the SERVO-DRIVE electrical motion support system.
For cabinet heights of 350 to 800 mm and widths up to 1,800 mm.
Three-dimensional front adjustment: Height ± 2 mm, Side ± 2 mm, Depth ± 2 mm.
AVENTOS HS top improvements:
- Compact fitting
- Requires only a shallow cabinet depth of 264 mm
- Convenient and easy power mechanism adjustment from the front
- NO cross stabilizer required
- Suitable for wooden fronts, wide/narrow aluminum frames, thin fronts, miter, and rebated applications
| Product # | Load Capacity | Door Height | Door Length | Max weight for door height 700 mm | Max weight for door height 750 mm | Max weight for door height 800 mm |
|---|---|---|---|---|---|---|
| 20S2B00N5 | 7.17 to 20.9 lb* | 13 3/4 to 20 5/8 in* | 15 3/4 to 70 7/8 in* | |||
| 20S2E00N5 | 11 to 28.7 lb* | 20 3/4 to 26 5/8 in* | 15 3/4 to 70 7/8 in* | |||
| 20S2C00N5 | 16 to 33.1 lb* | 13 3/4 to 20 5/8 in* | 15 3/4 to 70 7/8 in* | |||
| 20S2H00N5 | 1490 to 1764 lb* | 26 5/8 to 31 1/2 in* | Max. 70 7/8 in* | 14.9 to 29.2 lb* | 14.3 to 28.1 lb* | 13.2 to 27 lb* |
TECHNICAL SPECIFICATIONS
Brand
Blum
Minimum internal depth of the enclosure
10 7/8 in*
Material
Metal
Finish
Gray
System Name
Swing
Type of Opening
Swing Opening
Disclaimer
Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.
