Brochure
TANDEM plus 563F Full Extension Concealed Undermount Slide with BLUMOTION for Framed Cabinet
To add to cart, choose from the options below.
This product provides four-dimensional adjustment
- Side-to-side, 1.5 mm (front and rear)
- Height, 3 mm
- Tilt, 5 mm
- Depth, with optional locking device, 2.5 mm
- Depth, with elongated holes, plus or minus 4.5 mm
Maximum drawer thickness of 3/4 in (19 mm)
- Side-to-side, 1.5 mm (front and rear)
- Height, 3 mm
- Tilt, 5 mm
- Depth, with optional locking device, 2.5 mm
- Depth, with elongated holes, plus or minus 4.5 mm
Maximum drawer thickness of 3/4 in (19 mm)
| Product # | Length |
|---|---|
| 563F2290B | 9 1/32 in* |
| 563F3050B | 12 in* |
| 563F3810B | 15 in* |
| 563F4570B | 18 in* |
| 563F5330B | 21 in* |
ADVANTAGES AND BENEFITS
- Integrated BLUMOTION soft close
- Wide range of drawer lengths from 9" to 30", in 3" increments
- Runners for 21/32" to 3/4" drawer material thickness
- Bottom mount holes for mounting to a fixed shelf or a flush bottom cabinet
- Available for standard and heavy-duty applications
- Excellent stability and less sag even when drawer is fully loaded
- Bearing block for consistent reveal even in fully loaded drawer
- Rear notch increases to 35 mm to accomodate new side-to-side adjustment
- Same drawer box construction as the curent TANDEM runners
- Same drilling pattern as current 562/568 TANDEM plus BLUMOTION concealed runners
- Wide range of drawer lengths from 9" to 30", in 3" increments
- Runners for 21/32" to 3/4" drawer material thickness
- Bottom mount holes for mounting to a fixed shelf or a flush bottom cabinet
- Available for standard and heavy-duty applications
- Excellent stability and less sag even when drawer is fully loaded
- Bearing block for consistent reveal even in fully loaded drawer
- Rear notch increases to 35 mm to accomodate new side-to-side adjustment
- Same drawer box construction as the curent TANDEM runners
- Same drilling pattern as current 562/568 TANDEM plus BLUMOTION concealed runners
REQUIRED PRODUCTS
Requires the following products
Locking Devices for TANDEM Slides, Standard Mount
- Adjustment Direction: 2 Directions
- Adjustment: Height Adjustment
- Material: Zinc / Synthetic
- Side: Right
AND
Locking Devices for TANDEM Slides, Standard Mount
- Adjustment Direction: 2 Directions
- Adjustment: Height Adjustment
- Material: Zinc / Synthetic
- Side: Left
AND
Locking Devices for TANDEM Slides, Standard Mount
- Adjustment Direction: 4 Directions
- Adjustment: Height and Lateral Adjustment
- Material: Steel / Synthetic
- Side: Right
AND
Locking Devices for TANDEM Slides, Standard Mount
- Adjustment Direction: 4 Directions
- Adjustment: Height and Lateral Adjustment
- Material: Steel / Synthetic
- Side: Left
AND
Locking Devices for TANDEM Slides, Standard Mount
- Adjustment Direction: 6 Directions
- Adjustment: Height, Depth and Lateral Adjustment
- Material: Steel / Synthetic
- Side: Right
AND
Locking Devices for TANDEM Slides, Standard Mount
- Adjustment Direction: 6 Directions
- Adjustment: Height, Depth and Lateral Adjustment
- Material: Steel / Synthetic
- Side: Left
TECHNICAL SPECIFICATIONS
Brand
Blum
Drawer Type
Wood and Melamine
Slide Extension
Full Extension
Motion Technology
Soft-Close
Product Line
TANDEM Plus
Load Capacity
100 lb
Slide Mounted
Undermounted
BLUM Technology
Blumotion
Disclaimer
Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.
