Technical document
TANDEM plus 563H Full Extension Concealed Undermount Slide for Wood Drawer
Product # WEBKIT1011511
Max. drawer thickness 5/8"
New This product provides four-dimensional adjustment:
- Side-to-side, 1.5 mm (front and rear)
- Height, 3 mm
- Tilt, 5 mm
- Depth, with optional locking device, 3/32 in (2.5 mm)
- Depth, with elongated holes, plus or minus 11/16 in (4.5 mm)
Maximum drawer thickness of 5/8 in (16 mm)
- Side-to-side, 1.5 mm (front and rear)
- Height, 3 mm
- Tilt, 5 mm
- Depth, with optional locking device, 3/32 in (2.5 mm)
- Depth, with elongated holes, plus or minus 11/16 in (4.5 mm)
Maximum drawer thickness of 5/8 in (16 mm)
Product # | Length | Adjustment |
---|---|---|
WEBKIT1011511 | 15 in* | Height Adjustment Only - Standard |
WEBKIT1011506 | 9 1/32 in* | Height, Side and Depth Adjustment |
WEBKIT1011503 | 9 1/32 in* | Height Adjustment Only - Vertical Mount |
WEBKIT1011505 | 9 1/32 in* | Height and Side Adjustments - Standard |
WEBKIT1011510 | 12 in* | Height, Side and Depth Adjustment |
WEBKIT1011507 | 12 in* | Height Adjustment Only - Standard |
WEBKIT1011509 | 12 in* | Height and Side Adjustments - Standard |
WEBKIT1011514 | 15 in* | Height, Side and Depth Adjustment |
WEBKIT1011513 | 15 in* | Height and Side Adjustments - Standard |
WEBKIT1011518 | 18 in* | Height, Side and Depth Adjustment |
WEBKIT1011515 | 18 in* | Height Adjustment Only - Standard |
WEBKIT1011517 | 18 in* | Height and Side Adjustments - Standard |
WEBKIT1011522 | 21 in* | Height, Side and Depth Adjustment |
WEBKIT1011519 | 21 in* | Height Adjustment Only - Standard |
WEBKIT1011521 | 21 in* | Height and Side Adjustments - Standard |
ADVANTAGES AND BENEFITS
- Integrated BLUMOTION soft-close.
- Wide range of drawer lengths from 9" to 30", in 3" increments.
- Bottom mount holes for mounting to a fixed shelf or a flush bottom cabinet.
- Available for standard and heavy-duty applications.
- Excellent stability and less sag even when drawer is fully loaded.
- Bearing block for consistent reveal even in fully loaded drawer.
- Rear notch increases to 35 mm to accomodate new side-to-side adjustment.
- Same drawer box construction as the curent TANDEM runners.
- Same drilling pattern as current 562/568 TANDEM plus BLUMOTION concealed runners.
- Wide range of drawer lengths from 9" to 30", in 3" increments.
- Bottom mount holes for mounting to a fixed shelf or a flush bottom cabinet.
- Available for standard and heavy-duty applications.
- Excellent stability and less sag even when drawer is fully loaded.
- Bearing block for consistent reveal even in fully loaded drawer.
- Rear notch increases to 35 mm to accomodate new side-to-side adjustment.
- Same drawer box construction as the curent TANDEM runners.
- Same drilling pattern as current 562/568 TANDEM plus BLUMOTION concealed runners.
INCLUDED IN THIS WEBKIT
TECHNICAL SPECIFICATIONS
Product #
WEBKIT1011511
Brand
Blum
Drawer Type
Wood and Melamine
Slide Extension
Full Extension
Motion Technology
Soft-Close
Finish
Zinc
Product Line
TANDEM Plus
Load Capacity
100 lb
Slide Mounted
Bottom-Mounted
Pull-Out Type
563H (US) Face Frame - 5/8" Thick Sides
Side
Both
BLUM Technology
Blumotion
Disclaimer
Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.