Line art
TANDEM plus 563H Full Extension Concealed Undermount Slide with Blumotion for Face Frame Cabinet
Product # 563H3050B
New This product provides four-dimensional adjustment:
- Side-to-side, 1.5 mm (front and rear)
- Height, 3 mm
- Tilt, 5 mm
- Depth, with optional locking device, 3/32 in (2.5 mm)
- Depth, with elongated holes, plus or minus 11/16 in (4.5 mm)
Maximum drawer thickness of 5/8 in (16 mm)
- Side-to-side, 1.5 mm (front and rear)
- Height, 3 mm
- Tilt, 5 mm
- Depth, with optional locking device, 3/32 in (2.5 mm)
- Depth, with elongated holes, plus or minus 11/16 in (4.5 mm)
Maximum drawer thickness of 5/8 in (16 mm)
| Product # | Length |
|---|---|
| 563H3050B | 12 in* |
| 563H2290B | 9 1/32 in* |
| 563H3810B | 15 in* |
| 563H4570B | 18 in* |
| 563H5330B | 21 in* |
ADVANTAGES AND BENEFITS
- Integrated BLUMOTION soft-close.
- Wide range of drawer lengths from 9" to 30", in 3" increments.
- Bottom mount holes for mounting to a fixed shelf or a flush bottom cabinet.
- Available for standard and heavy-duty applications.
- Excellent stability and less sag even when drawer is fully loaded.
- Bearing block for consistent reveal even in fully loaded drawer.
- Rear notch increases to 35 mm to accomodate new side-to-side adjustment.
- Same drawer box construction as the curent TANDEM runners.
- Same drilling pattern as current 562/568 TANDEM plus BLUMOTION concealed runners.
- Wide range of drawer lengths from 9" to 30", in 3" increments.
- Bottom mount holes for mounting to a fixed shelf or a flush bottom cabinet.
- Available for standard and heavy-duty applications.
- Excellent stability and less sag even when drawer is fully loaded.
- Bearing block for consistent reveal even in fully loaded drawer.
- Rear notch increases to 35 mm to accomodate new side-to-side adjustment.
- Same drawer box construction as the curent TANDEM runners.
- Same drilling pattern as current 562/568 TANDEM plus BLUMOTION concealed runners.
REQUIRED PRODUCTS
Requires ONE of the following products
Locking Devices for TANDEM Slides, Standard Mount
- Adjustment Direction: 2 Directions
- Adjustment: Height Adjustment
- Material: Zinc / Synthetic
OR
Locking Devices for TANDEM Slides, Standard Mount
- Adjustment Direction: 4 Directions
- Adjustment: Height and Lateral Adjustment
- Material: Steel / Synthetic
OR
Locking Devices for TANDEM Slides, Standard Mount
- Adjustment Direction: 6 Directions
- Adjustment: Height, Depth and Lateral Adjustment
- Material: Steel / Synthetic
Requires ONE of the following products
Locking Devices for TANDEM Slides, Standard Mount
- Adjustment Direction: 2 Directions
- Adjustment: Height Adjustment
- Material: Zinc / Synthetic
OR
Locking Devices for TANDEM Slides, Standard Mount
- Adjustment Direction: 4 Directions
- Adjustment: Height and Lateral Adjustment
- Material: Steel / Synthetic
OR
Locking Devices for TANDEM Slides, Standard Mount
- Adjustment Direction: 6 Directions
- Adjustment: Height, Depth and Lateral Adjustment
- Material: Steel / Synthetic
TECHNICAL SPECIFICATIONS
Product #
563H3050B
Brand
Blum
Drawer Type
Wood and Melamine
Slide Extension
Full Extension
Motion Technology
Soft-Close
Product Line
TANDEM Plus
Load Capacity
100 lb
Slide Mounted
Bottom-Mounted
BLUM Technology
Blumotion
Disclaimer
Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.
