Warranty
Ascent Flat Screen Lift Mechanism
Product # CBLIFT0019
The Ascent is a push-to-operate mechanical lift that provides easy access to your screen and conceals it in desks and other cabinetry when not in use.
ADVANTAGES AND BENEFITS
- Quick and easy installation with a minimal number of steps.
- No power required; movement is controlled by counterbalancing weights.
- Swivels 112.5° for expanded viewing access.
- No power required; movement is controlled by counterbalancing weights.
- Swivels 112.5° for expanded viewing access.
TECHNICAL SPECIFICATIONS
Product #
CBLIFT0019
Brand
Accuride
Load Capacity
5.5 to 14.5 lb
Motion Type
Swivel, Vertical Extension
Finish
Black
Height
28.35 in
Depth
2.9 in
Interior dimensions required: Height
Min. 28 1/2 in
Interior dimensions required: Width
Min. 8 in
APPLICATION
- Accommodates screens from 5.5 to 14.5 pounds, up to 17.5 inches tall and 22 inches diagonally.
INCLUDED PRODUCT(S)
Lift assembly, cable clamps, edge protector, wire grommet, weight pack, fasteners, technical sheet, quick install guide and user's guide
IMPORTANT INFORMATION
- Do not operate the CBLIFT0019 unit without attaching adequate counterbalance weights. Weight plates are installed to counterbalance the weight of the television/screen. If more than two weight packs are required, order the weight extension plate kit # 29909775. See the technical sheet for weight pack recommendations and ordering information.
IMPORTANT: inadequate weight may cause the unit to lift too quickly. Too much weight will override the spring-action movement.
- Minimum inside depth must be determined by components.
IMPORTANT: inadequate weight may cause the unit to lift too quickly. Too much weight will override the spring-action movement.
- Minimum inside depth must be determined by components.