Trimming Instructions
Rev-A-Shelf tall Wood Cutlery Tray Insert
Product # 4WCT1
Cutlery insert can be trimmed for a custom fit in almost any drawer
Organize kitchen drawers with Rev-A-Shelf's Wood Cutlery Tray Insert. The 4WCT Series is made of our classic hardwood with a UV-cured clear finish to ensure an acceptable match to any kitchen cabinet. This modern day clutter solution requires a simple drop-in installation with two sizes that may be trimmed to fit various drawer sizes.
| Product # | Interior Dimensions Required - Width | Product Dimensions - Width |
|---|---|---|
| 4WCT1 | Min. 22.5 cm* | 22.2 to 37.1 cm* |
| 4WCT3 | Min. 36.5 cm* | 36.8 to 52.4 cm* |
ADVANTAGES AND BENEFITS
- Product can simply be dropped into drawer or trimmed to a custom fit (table saw recommended)
- 2 7/8 in (73.03 mm) depth for taller drawers
- Minimum trim size: 8 3/4 in (222.25 mm) width x 15 1/2 (393.7 mm) depth
- Fully assembled maple wood construction with a clear coat finish for durability
- Can be trimmed to exact size with table saw
- Limited Lifetime Warranty
- 2 7/8 in (73.03 mm) depth for taller drawers
- Minimum trim size: 8 3/4 in (222.25 mm) width x 15 1/2 (393.7 mm) depth
- Fully assembled maple wood construction with a clear coat finish for durability
- Can be trimmed to exact size with table saw
- Limited Lifetime Warranty
TECHNICAL SPECIFICATIONS
Product #
4WCT1
Finish
Natural
Interior Dimensions Required - Height
Min. 76 mm*
Interior Dimensions Required - Depth
Min. 39.4 cm*
Area of Activity
Storage, Preparation, Cooking
Product Dimensions - Height
73 mm*
Product Dimensions - Depth
39.4 to 55.9 cm*
Material
Maple
Solutions
Drawer Organization
Disclaimer
Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.
