Frames for K Wastebin II - Model: For two bins

To add to cart, choose from the options below.
Frame for K Wastebin II compatible with a push-to-open mechanism.

Bottom-mount waste management systems offered in single or double bin configurations. Frames are available in Chrome, Silver Gray or Anthracite finish and can be equipped with 34L (36 qt.) or 49L (52 qt.) bins. Bins are available in white and gray color only.
Finish: Champagne Chrome Silver Gray Select Options
Product # Finish
61020155 Champagne
61020140 Chrome
61020100 Silver Gray


- The frame can be equipped with a hands-free push-to-open device. Simply apply pressure on the door to open. The push-to-open device is available in gray.
- Elegant lateral tracks keep bins in place during opening and closing, and reduces bending of the door.
- Frame is available in chrome, silver gray and charcoal.
- Easy mounting on cabinet bottom using only eight screws.
- The frame and mounting supports can be adjusted in all directions.
- Concealed full extension slides with soft-close mechanism (if the push-to-open device is used, the soft-close motion will be reduced).
- Bins sold separately for one- or two-bin configurations in cabinets measuring 381 mm (15") and 457.2 mm (18").
- 34.1 l (36 qt) and 49.21 l (52 qt) bins available in white or gray.
- Quick assembly with Click Fixx system as well as an installation template and door brackets.
- Maximum load capacity of 44.5 kg (100 lb).


Product Dimensions - Width
14 7/8 in*
Product Dimensions - Depth
22 1/8 in*
Soft-Motion System
Load Rating
100 lb
For two bins
Min. Int. Width Required, Frameless Cabinet
Min. 15 1/2 in*
Min. Opening Required, Frame Cabinet
Min. 14 1/2 in*

Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.


A lid cannot be used on the back bin because it would be difficult to remove. If using a lid, we recommend using it only on the system's front bin.


If you use 34.06 l (36 qt) bins, the minimum required height is 496 mm (19-1/2") If you use 49.21 l (52 qt) bins, the minimum required height is 597 mm (23-1/2")