Line art
FLEX-ZIG
Product # 301416122
Easily bends around corners without the use of connecting cables
LED Flex-Zig's unique design allows for bending of the tape like never before.
With it's tiny size, Flex-Zig is versatile and can be bent in any direction on the surface.
Flex-Zig can be combined with a dimmer for any temperature in Kelvin (K).
With it's tiny size, Flex-Zig is versatile and can be bent in any direction on the surface.
Flex-Zig can be combined with a dimmer for any temperature in Kelvin (K).
| Product # | Light Color | Kelvin Color Temperature (K) |
|---|---|---|
| 301416122 | Warm White | 3000 K |
| 301416121 | Cool White | 6000 K |
ADVANTAGES AND BENEFITS
- 60 LEDs per meter (3.28 ft, 40 in)
- 4.8 W per meter (3.28 ft, 40 in), standard 12 V dc voltage
- Beam angle: 120°
- Luminous flux: 732 lm/ft
- Easy installation - just peel and stick
- Can be bent really easily and applied onto any surface
- Environmentally friendly
- Each strip is equipped with energy-saving LEDs to reduce power consumption and costs
- Can be cut every 2 in (50 mm)
- 4.8 W per meter (3.28 ft, 40 in), standard 12 V dc voltage
- Beam angle: 120°
- Luminous flux: 732 lm/ft
- Easy installation - just peel and stick
- Can be bent really easily and applied onto any surface
- Environmentally friendly
- Each strip is equipped with energy-saving LEDs to reduce power consumption and costs
- Can be cut every 2 in (50 mm)
REQUIRED PRODUCTS
Requires ONE of the following products
OR
OR
OR
OR
OR
TECHNICAL SPECIFICATIONS
Product #
301416122
Location
Other
Application
Kitchen, Living Room, Commercial, Furniture, Closet
Mounting
Surface
Luminaire
Flexible Linear
Lighting
Accent, Task
Standards and Certifications
CE, cULus
Luminous Efficiency
91.5 lm/W
Length
16 ft
Width
5/16 in*
IP
IP22
Lighting Type
LED
Tension (V)
12 V
Watts
24 W
Group
LED Group A
Price Point
Elite
Disclaimer
Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.
DISCLAIMER
Indoor installation only
Inserting the tape into the clips requires additional care and patience as the tape is not square at connection points like other tapes. Not taking necessary precautions can damage the internal connections and diodes.
Installation: choose a flat surface, clean the surface with alcohol and a cloth to remove any dirt, dust, or residue prior to installing the tape light.
*Make sure there is no oily residue on the surface otherwise the tape will not stick.
Inserting the tape into the clips requires additional care and patience as the tape is not square at connection points like other tapes. Not taking necessary precautions can damage the internal connections and diodes.
Installation: choose a flat surface, clean the surface with alcohol and a cloth to remove any dirt, dust, or residue prior to installing the tape light.
*Make sure there is no oily residue on the surface otherwise the tape will not stick.
