LED 24 V Tape Light

To buy, choose from the options below.
Light Color: Neutral White Warm White Kelvin Color Temperature (K): 3000 K 4200 K Select Options

Description

LED tape light with high light output

This high light output LED 24 V tape light provides a simple and effective way to light up any design.

REQUIRED PRODUCTS

Requires the following products

Per unit

TECHNICAL SPECIFICATIONS

Group
LED Group A
Installation
Linear
Functionality and Application
Countertop Lighting - Task, Commercial Display Lighting, Closet
Tension
24 V
Watts
72 W
Price Point
Elite
Standards and Certifications
UL
CRI (Color Rendering Index)
94
Connection Type
Klipr
Length
197 in
Height
1/16 in*
Width
5/16 in*
Luminous Flux
4724 Lumen
Lighting Type
LED
Disclaimer

Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.

IMPORTANT INFORMATION

- Can be cut at every 6 LED/33 mm (1-19/64")
- Length: 5,000 mm (196-27/32")
- Color rendering index: > 95
- Luminous efficacy: 72 lumens/watt
- Width: 8 mm (5/16")
- 180 LED SMD 3528 per meter
- 14.4 watt per meter
- Voltage: 24V DC
- Beam angle: 120°
- Luminous flux for 4,870 mm (191-47/64") roll: 4,724 lumens
- Luminous flux at 1,000 mm (39-3/8"): 944 lumens
- Luminous flux at 304.8 mm (12"): 288 lumens
- Lifespan of approximately 50,00 hours

APPLICATION

- For kitchens, furniture and displays
- Ideal for use in LED aluminum profiles

Surface preparation: Choose a flat surface area. Clean the surface with alcohol and a cloth to remove any dirt. Make sure no oily residue is left on the surface.

Installation: Remove the tape's backing strip. Install the tape on a dry surface, apply pressure and hold for a few seconds to stick.

ADVANTAGES AND BENEFITS

- Available in two different color temperatures
- Easy installation
- High light output
- Listed with UL for Canada and the USA

PHOTOS AND VIDEOS

DISCLAIMER

- Product information is subject to change - Do not bend where welded - Do not make the LED strip turn on itself - Do not bend LED strip - Wattage calculation for power supplies should be using an 80% maximum yield - Please contact the special orders desk for any special requests
LED 24 V Tape Light

To buy, choose from the options.