Instructions
SlimLED RGB Kit
Product # 3014118742
Ideal for use with our aluminum profiles
LED RGB (red, green, blue) color changing tape light kit.
Innovative LED lighting that has an ultra slim lightweight profile.
Tape light and power supply are listed with UL for Canada and the USA.
Innovative LED lighting that has an ultra slim lightweight profile.
Tape light and power supply are listed with UL for Canada and the USA.
ADVANTAGES AND BENEFITS
3M tape adhesive
Average life span: 20,000 hours
IP22 - Indoor installation only
7.2W per meter (totaling 21.6W for 3 meters)
Easy installation - just peel and stick
Environmentally friendly
Each strip is equipped with energy-saving LEDs for reducing power consumption and costs.
Average life span: 20,000 hours
IP22 - Indoor installation only
7.2W per meter (totaling 21.6W for 3 meters)
Easy installation - just peel and stick
Environmentally friendly
Each strip is equipped with energy-saving LEDs for reducing power consumption and costs.
TECHNICAL SPECIFICATIONS
Product #
3014118742
Application
Furniture
Mounting
Surface
Light Color
Color Changing
Standards and Certifications
UL
Length
10 ft
Lighting Type
LED
Tension (V)
12 V
Watts
21.6 W
Price Point
Optimum
Kit
Complete Kit
Features
With Integrated On/Off Switch
INCLUDED PRODUCT(S)
Includes remote control to operate color changing.
Includes 3.5' additional cord length to allow for more distance between the power supply and light.
Includes RGB remote and receiver.
Includes 12V DC 24W power supply wall adapter type:
3 x 2 x 1-1/2"
Includes 4' primary cord with inline on/off switch.
Includes 3.5' additional cord length to allow for more distance between the power supply and light.
Includes RGB remote and receiver.
Includes 12V DC 24W power supply wall adapter type:
3 x 2 x 1-1/2"
Includes 4' primary cord with inline on/off switch.
DISCLAIMER
Indoor installation only
Always connect LED load before connecting power source!
Installation: choose a flat surface, clean the surface with alcohol and a cloth to remove any dirt, dust, or residue prior to installing the tape light.
*Make sure there is no oily residue on the surface otherwise the tape will fail to adhere.
Maintenance: Turn power off and clean with a dry cloth.
Always connect LED load before connecting power source!
Installation: choose a flat surface, clean the surface with alcohol and a cloth to remove any dirt, dust, or residue prior to installing the tape light.
*Make sure there is no oily residue on the surface otherwise the tape will fail to adhere.
Maintenance: Turn power off and clean with a dry cloth.