Instructions
KLIPR LED 8 mm Tape Power Cord 12 V
Product # 30141096
For uncoated 8 mm (5/16") IP22 LED tape light
The new KLIPR system: an easy way to insert wires or tape lighting.
Easy do-it-yourself KLIPR allows customers to make connections as needed with different direct connections to tape or with cord lengths measuring up to 2 m (6.6' or 79") long.
Easy do-it-yourself KLIPR allows customers to make connections as needed with different direct connections to tape or with cord lengths measuring up to 2 m (6.6' or 79") long.
ADVANTAGES AND BENEFITS
Customize your wire lengths as needed.
REQUIRED PRODUCTS
Requires the following products
Requires ONE of the following products
OR
LED Tape 9.6 W/m 12 V
- Light Color: Warm White
- Kelvin Color Temperature (K): 3100 K
- Luminous Efficiency: 83.9 lm/W
OR
LED Tape 9.6 W/m 12 V
- Light Color: Neutral White
- Kelvin Color Temperature (K): 4100 K
- Luminous Efficiency: 84.6 lm/W
TECHNICAL SPECIFICATIONS
Product #
30141096
Compatibility
Micro 12
Tension (V)
12 V
Finish
Black
Length
78 3/4 in*
Group
LED Group A
Disclaimer
Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.
IMPORTANT INFORMATION
For uncoated 8 mm IP22 tape light
Class 2
100 W max
12 V
A 1" heat shrink sleeve (not included), class 300 V / 125 °C, must be installed on each connector to avoid bad connections.
Compatible cable 20-22AWG type TR64, 300 V.
Installation must be done by qualified personnel.
Class 2
100 W max
12 V
A 1" heat shrink sleeve (not included), class 300 V / 125 °C, must be installed on each connector to avoid bad connections.
Compatible cable 20-22AWG type TR64, 300 V.
Installation must be done by qualified personnel.
DISCLAIMER
Tape light sets are sold separately. Product information is subject to change without prior notice. Do not go over 5 A to match class 2 requirements. Once the KLIPR covers have been closed, they are securely locked in place and you will have to use pliers to reopen/lift the KLIPR cover open.
