Capsens - LED Dimmer for 12 V and 24 V

Product #: 152126003

Description

Invisible Dimmer Switch!

- A hidden electronic touch-sensitive sensor switch designed to be applied to the back side of the surfaces (e.g., wood, plastic, glass, and other opaque or transparent nonmetal materials).
- Operates at a very low safety voltage.

TECHNICAL SPECIFICATIONS

Product number
152126003
Lighting Type
LED
Features
Dimmable, Touch Function, Round
Style
Contemporary
Finish
Black
Shape
Round
IP
IP44
Tension
12 V
Group
LED Group A, LED 24 V dc Exclusive
Watts
30 W
Height
13/32 in*
Width
3/32 in*
Diameter
1 31/32 in*
Bore Hole
1 1/2 in*
Installation
Recessed
Functionality and Application
Switches and Dimmers
Installation Location
Surface, Kitchen Cabinet, Other
Lighting Solutions
Switches and Dimmers, Accessories
Disclaimer

Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.

ADVANTAGES AND BENEFITS

- Quick touch for on/off, long touch for light intensity (dimmer function).
- Features a memory setting. Once you find your favorite setting and then power down your lights, the next time you turn them on CapsSens will remember your last-used setting.
- Has automatic shutdown after 18 hours of continuous usage, a built-in safety feature.
- Integrated "soft-start" and "soft-stop" function.

APPLICATION

CapsSens cannot be installed on metallic surfaces. For other materials, like granite, it depends on the composite materials and it is recommended that you make a preliminary test.

IMPORTANT INFORMATION

- Compatible with 12 V (30 W) and 24 V (60 W) LED devices
- Activation area: approximately 50 mm diameter
- Protection degree: IP44

- To be used with the follow materials:
- Wood: maximum thickness of 30 mm
- Plexiglass: maximum thickness of 20 mm
- Glass: maximum thickness of 12 mm

- How it works:
- To switch on/off without making physical contact with the switch but only by touching the surface where it is installed.
- To increase or decrease the light intensity (dimming function) just press the surface and hold until the right level of light is reached.
- A short flash indicates that CapsSens has reached maximum light intensity.

INCLUDED PRODUCT(S)

- Capsen dimmer wired for connecting up to 8 lights

DISCLAIMER

To be installed into non-metallic materials
Capsens - LED Dimmer for 12 V and 24 V

Product number: 152126003