FlexyLED CR TW

To add to cart, choose from the options below.

Tunable White flexible LED modules for back-to-back connection

FlexyLED CR TW is a LED strip with Tunable White dynamic light. It is available in 12 in (300 mm) and 47 in (1200 mm) modules, divisible every 4 in (100 mm). FlexyLED CR TW comes with Twin LED technology which provides dynamic adjustment or static selection of color temperature, with the aid of Tunable White or Changeable White selectors (sold separately). See 1070242000TW and/or 1070240500TW.
Length: 300 mm 1 200 mm Watts: 1.5 W 6 W Select Options
Product # Length Watts
107024300TW 300 mm 1.5 W
1070241200TW 1 200 mm 6 W

ADVANTAGES AND BENEFITS

- Flexible LED tape available in different lengths.
- Can be cut every 4 in (100 mm).
- Quick connect system, no soldering of wires.
- The highly resistant double-sided adhesive provides fast installation without the use of any tools.
- The resin protects each LED strip against moderate mechanical shock and water splashes.
- Compatible dimmer switches available (see Suggested Products).

REQUIRED PRODUCTS

Requires the following products

TECHNICAL SPECIFICATIONS

Location
Countertop, Baseboard
Application
Kitchen, Bathroom, Commercial, Closet
Mounting
Surface
Luminaire
Flexible Linear
Lighting
Accent, Task
Light Color
Tunable White
Kelvin Color Temperature (K)
2900 K - 6800 K
Standards and Certifications
UL
CRI (Color Rendering Index)
80
Luminous Efficiency
85 lm/W
IP
IP44
Lighting Type
LED
Tension (V)
24 V
Group
LED Group A
Watts/Foot
1.52 W

IMPORTANT INFORMATION

- Tapes can be connected to one another.
- Power cord required and sold separately (see Suggested Products).
- Connecting cable sold separately (see Suggested Products).

INCLUDED PRODUCT(S)

FlexyLED CR tape light with 3M(TM) adhesive tape

RELATED DOCUMENTS

DISCLAIMER

- Product information subject to change without notice.
- There is no replacement bulb available for this light due to its average lifespan of 50 000 hours.
- Richelieu grants no warranty on LED lights if a power supply other than the one specifically prescribed for this product is used.
- Do not exceed the maximum wattage by connecting more lights than prescribed; damage to the power supply may result.
- Wattage calculation for power supplies should be using an 80% maximum yield.
- Do not make the LED strip turn on itself.
- Do not bend LED strip.
- Power cord required and sold separately (please see Suggested Products).
- Connecting cable sold separately (please see Suggested Products).
- Please contact the special orders desk for any special requests.