LED 24 V Tape Light
LED 24 V Tape Light
To add to cart, choose from the options below.
LED tape light with high light output
This high light output LED 24 V tape light provides a simple and effective way to light up any design.
| Product # | Light Color | Kelvin Color Temperature (K) | CRI (Color Rendering Index) | Luminous Efficiency |
|---|---|---|---|---|
| 3014180124 | Neutral White | 4200 K | 94 | 84.4 lm/W |
| 3014180122 | Warm White | 3000 K | 92.3 | 84.5 lm/W |
REQUIRED PRODUCTS
Requires the following products
AND
AND
TECHNICAL SPECIFICATIONS
Location
Other
Application
Kitchen, Living Room, Commercial, Closet
Mounting
Surface
Luminaire
Flexible Linear
Lighting
Accent
Standards and Certifications
cULus
Length
197 in
Height
1/16 in*
Width
5/16 in*
IP
IP22
Lighting Type
LED
Tension (V)
24 V
Watts
72 W
Group
LED Group A
Connection Type
Klipr
Luminous Flux
4871 Lumen
Features
Dimmable
Disclaimer
Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.
SUGGESTED PRODUCTS
- LED Profiles
- Power cables and connectors
- Transformers and Power Supplies
- Switches and Dimmers
IMPORTANT INFORMATION
- Can be cut at every 6 LED/33 mm (1-19/64")
- Length: 5,000 mm (196-27/32")
- Color rendering index: > 95
- Luminous efficacy: 84.5 lumens/watt
- Width: 8 mm (5/16")
- 180 LED SMD 3528 per meter
- 14.4 watt per meter
- Voltage: 24V DC
- Beam angle: 120°
- Luminous flux for 4,870 per roll
- Luminous flux at 1,000 mm (39-3/8"): 944 lumens
- Luminous flux at 304.8 mm (12"): 288 lumens
- Lifespan of approximately 50,00 hours
- Length: 5,000 mm (196-27/32")
- Color rendering index: > 95
- Luminous efficacy: 84.5 lumens/watt
- Width: 8 mm (5/16")
- 180 LED SMD 3528 per meter
- 14.4 watt per meter
- Voltage: 24V DC
- Beam angle: 120°
- Luminous flux for 4,870 per roll
- Luminous flux at 1,000 mm (39-3/8"): 944 lumens
- Luminous flux at 304.8 mm (12"): 288 lumens
- Lifespan of approximately 50,00 hours
APPLICATION
- For kitchens, furniture and displays
- Ideal for use in LED aluminum profiles
Surface preparation: Choose a flat surface area. Clean the surface with alcohol and a cloth to remove any dirt. Make sure no oily residue is left on the surface.
Installation: Remove the tape's backing strip. Install the tape on a dry surface, apply pressure and hold for a few seconds to stick.
- Ideal for use in LED aluminum profiles
Surface preparation: Choose a flat surface area. Clean the surface with alcohol and a cloth to remove any dirt. Make sure no oily residue is left on the surface.
Installation: Remove the tape's backing strip. Install the tape on a dry surface, apply pressure and hold for a few seconds to stick.
DISCLAIMER
- Product information is subject to change
- Do not bend where welded
- Do not make the LED strip turn on itself
- Do not bend LED strip
- Wattage calculation for power supplies should be using an 80% maximum yield
- Please contact the special orders desk for any special requests
