Instructions
LED Tape 9.6 W/m 24 V
To buy, choose from the options below.
Product № | Light Color | Kelvin Color Temperature (K) |
---|---|---|
30142496124 | Neutral White | 4100 K |
30142496122 | Warm White | 3000 K |
Description
Flexible LED tape with high output. Ideal for recessed aluminum profiles.
This LED tape comes in 198 in (5 m) rolls and can be shortened every six LEDs.
- Can be cut every 50 mm or every six LEDs
- Can be applied onto any surface, 3M adhesive
- Beam angle: 120°
REQUIRED PRODUCTS
Requires the following products |
|
---|---|
![]() |
Per unit
|
Requires ONE of the following products |
|||||||
---|---|---|---|---|---|---|---|
![]() |
See Watts, Length, Height, Width options | ||||||
OR
| |||||||
![]() |
See All Options | ||||||
OR
| |||||||
![]() |
See Watts and other options |
TECHNICAL SPECIFICATIONS
Location
Inside Cabinet, Under Cabinet, Furniture, Countertop
Application
Kitchen, Commercial, Furniture, Closet
Mounting
Surface
Luminaire
Flexible Linear
Compatibility
Micro 24
Lighting
Accent
Standards and Certifications
cULus
CRI (Color Rendering Index)
90
Luminous Efficiency
80.12 lm/W
Length
16 ft 4 in*
Height
1/16 in*
Width
5/16 in*
IP
IP22
Lighting Type
LED
Tension (V)
24 V
Watts
48 W
Group
LED Group A
Connection Type
Micro 24
Luminous Flux
234.5 Lumen
Features
Dimmable
Disclaimer
Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.
SUGGESTED PRODUCTS
- LED Profiles
- Power cables and connectors
- Switches and Dimmers
- Transformers and Power Supplies
IMPORTANT INFORMATION
- 36.6 LED/ft, 120 LED/m, 600 LED/roll total
- Rated power: 2.9 W/ft, 9.6 W/m, 48 W/roll total
- We recommend a maximum length of 10 m or 96 W
- Rated power: 2.9 W/ft, 9.6 W/m, 48 W/roll total
- We recommend a maximum length of 10 m or 96 W
DISCLAIMER
- Product information is subject to change
- Do not bend where welded
- Do not make the LED strip turn on itself
- Do not bend LED strip
- Wattage calculation for power supplies should be using an 80% maximum yield
- Please contact the special orders desk for any special requests