Included products
TRESCO LED FlexTape 3W Flexible Lighting 12 V dc
To add to cart, choose from the options below.
Peel-and-stick lighting
High Output FlexTape has a low profile that can be used in many discreet locations.
One roll uses 3 W of energy per foot and comes with an adhesive backing that allows easy mounting on any clean, flat surface.
Sold in 16.4' (5 m) rolls, the tape is cuttable every 1" (25 mm) and features diodes placed 5/16" (7 mm) apart for greater coverage and illumination.
One roll uses 3 W of energy per foot and comes with an adhesive backing that allows easy mounting on any clean, flat surface.
Sold in 16.4' (5 m) rolls, the tape is cuttable every 1" (25 mm) and features diodes placed 5/16" (7 mm) apart for greater coverage and illumination.
Product # | Light Color | Kelvin Color Temperature (K) |
---|---|---|
LLEDFLXTPECRHO3 | Cool White | 4800 K |
LLEDFLXTPENRHO | Warm White | 3500 K |
ADVANTAGES AND BENEFITS
- Mounts with adhesive backing
- Cuttable every 1 in (25.4 mm)
- Height: 2.3 mm; width: 10 mm
- Low heat
- No soldering required
- Cuttable every 1 in (25.4 mm)
- Height: 2.3 mm; width: 10 mm
- Low heat
- No soldering required
REQUIRED PRODUCTS
Requires the following products
AND
Requires ONE of the following products
OR
OR
OR
TECHNICAL SPECIFICATIONS
Location
Under Cabinet, Closet, Furniture
Application
Kitchen, Living Room, Commercial
Mounting
Surface
Luminaire
Flexible Linear
Lighting
Accent
Finish
Unfinished
Standards and Certifications
UL
Luminous Efficiency
50 lm/W
Length
16.4 ft
Lighting Type
LED
Tension (V)
12 V
Watts
3 W
Price Point
Optimum
SUGGESTED PRODUCTS
- Switches and Dimmers
- Power cables and connectors
- LED Profiles
- Lighting
- Transformers and Power Supplies
IMPORTANT INFORMATION
- Average rated life: 50 000 hours
- Maximum continuous run: 16.4 ft (5 m); maximum per power supply: 20 ft (6 m)
- Lumens: 149 per sq ft (489 per sq m)
- Maximum continuous run: 16.4 ft (5 m); maximum per power supply: 20 ft (6 m)
- Lumens: 149 per sq ft (489 per sq m)
DISCLAIMER
All product dimensions and specifications are subject to change without prior notice.
To be used on clean, smooth surfaces. Pressure must be applied for proper tape adhesion.
To be used on clean, smooth surfaces. Pressure must be applied for proper tape adhesion.