KLIPR LED 8 mm Tape Connector 12 V

Product №: 30141096

- 50 by case
Required products

Description

For uncoated 8 mm (5/16") IP22 LED tape light

The new KLIPR system: an easy way to insert wires or tape lighting.
Easy do-it-yourself KLIPR allows customers to make connections as needed with different direct connections to tape or with cord lengths measuring up to 2 m (6.6' or 79") long.

REQUIRED PRODUCTS

Requires the following products
FlexyLED CH 12V DC 4 products	See Light Color and other options

Requires ONE of the following products
FLEX-ZIG Product № 301416122	Per unit
OR
LED Tape 9.6 W/m 12 V Product № 30141296122 Light Color: Warm White Kelvin Color Temperature (K): 3100 K Luminous Efficiency: 83.9 lm/W	Per unit
OR
LED Tape 9.6 W/m 12 V Product № 30141296124 Light Color: Neutral White Kelvin Color Temperature (K): 4100 K Luminous Efficiency: 84.6 lm/W	Per unit

TECHNICAL SPECIFICATIONS

Product №

30141096

Compatibility

Micro 12

Tension (V)

12 V

Finish

Black

Length

78 3/4 in*

Group

LED Group A

Disclaimer

Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.

INCLUDED PRODUCT(S)

2 clips and 2 m (6-1/2 ft) wire per pack

IMPORTANT INFORMATION

For uncoated 8 mm IP22 tape light
Class 2
100 W max
12 V
A 1" heat shrink sleeve (not included), class 300 V / 125 °C, must be installed on each connector to avoid bad connections.
Compatible cable 20-22AWG type TR64, 300 V.
Installation must be done by qualified personnel.

ADVANTAGES AND BENEFITS

Customize your wire lengths as needed.

DISCLAIMER

Tape light sets are sold separately. Product information is subject to change without prior notice. Do not go over 5 A to match class 2 requirements. Once the KLIPR covers have been closed, they are securely locked in place and you will have to use pliers to reopen/lift the KLIPR cover open.