Moldings and Extrusions
Product #: MRB251PH
|Product number||Height||Width||Material||Interior Measurements||Bored||Front Facing Height||Packaging format|
|MRB251PH||3/4 in||13/64 in||Aluminum||1/16 in||Yes||1/4 in||Length of 12 linear foot|
|MRB551VCH||7/8 in||1/4 in||Anodized Aluminum||5/32 in||Yes||3/8 in||Per unit|
|MRB851PH||7/8 in||3/8 in||Aluminum||9/32 in||Yes||3/8 in||Length of 12 linear foot|
|MRB1851S||7/8 in||5/8 in||Aluminum||1/2 in||No||3/8 in||Per unit|
|MRB1851M||1 in||5/8 in||Aluminum||1/2 in||No||3/8 in||Per unit|
We strongly recommend that you order the products TUBECART and CAP (two CAPs per TUBECART) to package this product. Please note that if you do not, returns or claims for packaging defects will not be accepted. Feel free to contact us at firstname.lastname@example.org with questions.
Disclaimer: Picture for visual reference only: actual product may vary from that shown in photo. The dimensions and finish may vary due to manufacturing methods. All technical drawings and documents contain examples for the assembly of different supplier hardware. The customer cannot derive any claims from the use of these documents. No responsibility is assumed for design details relating to the construction or project.The preceding information as well as any technical recommendations given in writing, verbally or based on tests are provided to the best of our knowledge. However, they are non-binding recommendations only and do not affect your responsibility to determine the correctness of given recommendations and suitability of the product for your particular purposes. The application, use or processing of our products as well as the production of products based on our technical recommendations are beyond our control and therefore fall exclusively in your area of responsibility. Sales of our products are effected according to our most updated General Sales and Delivery Conditions. Please note that Richelieu will not accept any returns or claims for unpackaged products.